Page 1
MADE IN MADE IN BELGIUM The only limitation is your imagination ... Hugyfot User Manual HFN-D7200 Hugyfot User Manual HFN-D7200...
Page 2
Philosophy The HugyCheck system is awarded ‘Innovation of the year 2009’ at Duikvaker in Utrecht. From the early start in 1953, the Hugyfot philoso- phy consisted of developing housings that were not The HugyCheck system allows the diver to check...
Hugyfot User Manual Introduction ....................... Safety precautions ..................Tips ........................... Housing overview ..................Installing the camera ................Fitting the lens ....................Fitting the port ..................... Connecting the strobes ................ Fixing a sync cord ................Fixing an optical adapter ............Fixing the strobe arms ..............
Your Hugyfot housing has been designed and developed by using the latest CAD/CAM techniques. It has been milled out of a solid block of seawater re- sistant aluminum and has been treated with a Teflon coating after it has been anodised.
These can cause fire and are harmful to your health. sync cords whenever they are connected to the housing bulk heads. Greasing the threaded part will allow swift fitting and removal of the connectors and will avoid corrosion on the bulkheads. Hugyfot User Manual HFN-D7200...
(velcro) and is will activate the battery test mode. Green close placed outside of the housing. open LED: battery is OK. Red LED: replace battery. Pushing the switch to the left: activate Hu gyCheck system (LED blinks red/green/red). Hugyfot User Manual HFN-D7200...
Page 8
(5). The top side of the back shell should be about 3 cm over the top side of the front shell. Gently lower the top part of the back shell while bringing it backwards (6). While bringing the back shell backwards, Hugyfot User Manual HFN-D7200...
When using fixed focal lenses, fit the focus gear (if applicable) before fitting the lens to the camera body. Hugyfot provides several zoom and focus gears depending on the brand, model or type of lens. Please check the lens charts on our website to look up the appropriate zoom or focus gear for your lens.
7. Fitting the port Depending on the lens being used, different Hugyfot ports and extension rings are available. Please check our port charts in order to determine which port and extension ring you need for a specific lens. Before fitting any port or extension ring, make sure that it is fitted with the proper Oring (black 105x3) and see to...
Your Hugyfot housing comes with three 25mm (1”) arm balls (one on top of each handle and one on top of the housing). The Hugyfot strobe arms are also Each sync cord (whether it is a 5-pin or a 6-pin) will have a plug on the hou- equipped with 25mm (1”) arm balls on both ends and are fixed to the housing...
10. Using the HugyCheck system 9. Installing a viewfinder (standard, straight or 45°) Your Hugyfot underwater housing is equipped with the ‘genuine’ HugyCheck pre Your Hugyfot housing comes with a stan- dive check system. Introduced in 2008, this system has constantly proven its...
LED will be reactivated while the green LED will stop blinking. When opening the housing after a dive, the vacuum has to be released by unscrewing the one way valve from the bulkhead. Hugyfot User Manual HFN-D7200...
Page 14
Fits your camera like a glove Hugyfot NV Industrielaan 30 - Zuid III - 9320 Erembodegem - Belgium www.hugyfot.com - info@hugyfot.com...