Switch Functions - Bosch BNO055 User Manual


D2 glows  when BNO's FW flash is ongoing.

5.2 Switch functions


During power on:
o switch is in L  MCU will be in boot load mode
o switch in H  MCU will be in Application mode
BST-BNO055-AN009-00 | Revision 1.0 | August 2014
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
Application note
BNO055 – USB stick user guide
Page 6
Bosch Sensortec