Related Manuals for ACTIVE STATION ASD48-1A
Summary of Contents for ACTIVE STATION ASD48-1A
- Page 1 Electric Height Adjustable Desk Models: ASD48-1A ASD48-1B ASD72-1A ASD72-1B Desk frame assembly instructions...
- Page 2 Inappropriate use of this product may cause injury. Do not move around, crawl or lie under the desk frame while operating. Do not sit or stand on the desk. Check that cables have enough slack to move with the frame. This desk is designed for indoor use only.
- Page 3 Controller: Input Voltage: AC 110V /220V Output Voltage: DC 24V Duty Cycle: Max.10% Columns: Desk frame part: Built-in limit switch Dynamic load: 265lbs The maximum static load: 310lbs Load speed: 1.2in/s Lift range: 25in-51in Desk top: Size: 30in deep X 48in or 72in wide 3/4in thick laminated on both sides with vinyl edging Gross Weight...
- Page 4 Part drawing Legs 2PCS Controller 1PC M6X10 M8X10 M8X25 4PCS 12PCS 8PCS Controller Bracket 1PC Motor wires 2PCS Switch 1PC Power cable 1PC Brace 1PC Connecting Plate...
- Page 5 Lay 2 Long (C) and 2 Horizontal (D) tubes on a flat surface as shown. Line screw holes up and bolt tight using M8X10 locking bolts (6 per leg) 2: Connect horizontal frame pieces to legs Bolt 2 leg pieces (B) to legs using M8X25 bolts (4 per leg) 3: Install 2 feet pieces (B)
-
Page 6: Console Instruction
Use 4M6X10 bolts to install the controller bracket as shown. Slide controller in bracket from side. 5: Install controller 6: Plug in 2 Motor cables, 1 console cable and power cable. Console Instruction Sets desk top to a Height display height of 29in Push and hold to Preset memory height... -
Page 7: Console Operation
Console operation Lightly touch up/down button and hold the key to rise and low the desk height Press HOME button to take the desktop to 29in height Ml,M2 press and hold the key in 5 seconds (until beep sounds) to set current position in memory.