Looket P20 User Manual

Pmp series

Hide thumbs

Table of Contents

Quick Links

Download this manual

User Manual v.1.0

Looket PMP

Table of Contents

Summary of Contents for Looket P20

Page 1 User Manual v.1.0 Looket PMP...
Page 2 Please carefully read this user guide instruction before using the product. Online information and Product Registration You can find more information about the player and register your unit in Looket website. http://www.looket.com The firmware upgrade news will be provided through registered e-mail address.
Page 3 Table of contents Before Using - Certifications & Copyrights - Notice for safety - Caution - Unit package - Designation - Designation Getting Started - Turn on / Turn off - Charging the battery - Connecting AV out port - Cable connection for recording - USB cable connection Operation - Video player...
Page 4: Before Using
Before Using...
Page 5 ＊ The software, video and audio which have an intellectual property are protected by copyright and international laws. It is definitely each user’s responsibility when he/she reproduce or distribute the contents created using Looket PMP. ＊ SysOnChip has all the rights of the patent, literary property, and intellectual property related to this manual.
Page 6 ⊙ Do not use while walking or driving, which may cause any injury or accidents. ⊙ Do not attempt to disassemble or modify this Looket PMP, AC adapter, and any accessories included. ⊙ LCD may be temporarily discolored at the very low or too high temperature.
Page 7 ⊙ Do not take a picture or leave Looket PMP with the lens aimed directly at the sun. ⊙ If the Looket is subjected to a sudden temperature change, for example by bringing it from a cold place into a warm room, condensation may form on the inside. Use the device after the temperature difference has subsided.
Page 8: Unit Package
Unit package Looket PMP Data CD AV Cable USB Host Cable USB Slave Cable Earphones AC Adapter (110 ~ 240V) Quick Manual Lithium-ion Battery 2EA RCA Adapter (optional) Carrying Case (optional) Remote Controller (optional) * Package contents might vary depending on countries without notice.
Page 9 Designation 17) HDD LED 1) Dual Stereo Speaker 2) TFT LCD 10) Remote Control Connector(optional) 3) Charging LED (Blue / Blinking) 11) AV Out / Earphones Connector 4) Navigation Key or Joystick 12) AV In Connector 5) Escape Button 6) Menu Button 13) USB Host / Slave Connector 7) Hold Switch...
Page 10 Designation Dual Stereo Speaker: Built-in stereo sound speaker TFT LCD : 16.7 Million color display & QVGA LCD Charging LED : Blinking - during charging / Blue light on - after full charging Navigation Key : 5 Directional switch. Up, Down, Left, Right, Enter Escape Button : Return to previous menu or escape the current mode.
Page 11: Getting Started
Getting Started - Turn on / Turn off - Charging the battery - Connecting AV out port - Cable connection for recording - USB cable connection (Slave connection & Host connection) - Disconnecting USB connection...
Page 12 Turn on / Turn off Press the POWER button of the left side for 2-sec. You will see the light of HDD LED on top cover If LCD off switch is selected, the warning message will appear in LCD as below for short moment.
Page 13 Close the battery cover. And lock the battery cover switch. • Connect Looket PMP with AC adapter, and then plug the adapter into the wall socket. • The charging blue LED will be blinking during charging, and turn on once it is fully charged.
Page 14 Looket PMP can be usable with other electronic products like TV, VTR, Beam Projector, etc. Connect the AV out connector of Looket PMP with the AV cable included in the package. The AV cable consists of phone jack and RCA jack.
Page 15 Cable connection for recording ※ Looket can be input signal of other AV products • Open the AC/DC jack cover and insert the phone jack of the AV cable into the AV IN connector. • Connect the RCA jack of AV Cable to the cable of other AV product like the picture 1.
Page 16 USB cable connection Connecting to PC • Connect the Looket USB cable included in the package to the USB port of your PC • During USB connection with PC, do not operate any key of Looket PMP. • If any Movie, Audio, FM, or Photo player is executed, escape from the play mode. Otherwise USB cannot connected.
Page 17 USB cable connection Connect to other USB products • Connect the Looket USB Host cable included in the package to your other USB products such as USB memory sticks, digital cameras, memory card readers, etc. • Refer to ‘File Browser’ function.
Page 18 - When you see the ③ message, now you may unplug the USB cable from your Looket and computer. ③ - If you see the message ④, finish the program you are using for Looket properly and start the disconnecting procedure again.
Page 19: Operation
Operation - Video Player - Audio Player - FM Radio - Photo Viewer - File Browser - Recording - Setup...
Page 20: Video Player
Video player Getting started (3) Choose the movie file when (1) Press and hold the power button (2) Select the Video Player in the main menu you see the file structure like and press in the middle of navigation key. below.
Page 21 Video player LCD display Volume Battery status No SMI file warning Play time Caption area Proceeding bar...
Page 22 Video player Key operation Press middle joystick : Volume up pause and resume Press and hold : Press and hold : Fast forward 8 sec. Rewind 8 sec. Volume down Go to previous menu Popup setup menu Hold key LCD off Power On/Off Button Press and hold it for 2sec.
Page 23 Video player Menu contents LCD Brightness : By clicking navigation button to the left and right, the brightness of LCD screen can be changed. Composite Out : Select AV out by using left and right button of navigation key. TV Standard : Choose AV out signal between NTSC mode and PAL mode by using left and right button of navigation key.
Page 24 Video player Codec information When choosing the file whose codec cannot be Spider Man.avi supported by Looket, the warning message will appear. In some files, only audio codec can be supported. This file is Not supported! Play next movie continuously? Click ‘Yes’...
Page 25: Audio Player
Audio player Getting started (1) Press and hold the power button. (2) Select Audio Player and press in the middle of navigation button in the main menu. (3) Music file and folder in the Audio directory (4) The selected music file will be played. will be seem on the screen.
Page 26 Audio player LCD display Current time Volume Battery status Play button (Previous, Play, Next, Stop, Pause) Proceeding bar Music file name Playing effect Playback time Playback time Sampling rate Bit rate...
Page 27 Audio player Key operation Press middle joystick: Volume up pause or resume Press quickly : Select the previous song file. Press quickly: Select the next song file. Press for 1-sec.: Rewind current playing Press for 1-sec.: Fast forward current song playing song Volume down Go to previous menu...
Page 28 Audio player Menu contents Play Mode Three modes are in the play menu Normal, Shuffle, Repeat Volume The Volume has 0~25 stages. Equalizer Select with left and right button on navigation key. There are 6 equalizer mode. Normal, Classic, Dance, Rock, Pop, User...
Page 29 Audio player Setting User mode in equalizer Select USER in the equalizer With navigation key, change the mode and press in the spectrum as you like. middle of navigation key. One step is 1dB. When finishing one frequency’s spectrum, move to other frequency with navigation key and set the spectrum.
Page 30 FM Radio Getting started (1) Press and hold the power button. (2) Select FM radio in the main menu and press in the middle of navigation key. (4) To go to Preset mode, press menu button. (3) To move the frequency of radio, press left Move to the frequency you want to listen or right button of navigation key.
Page 31 FM Radio LCD display Current Time Volume Battery Status Stereo / Mono Indicator Current Frequency Preset List...
Page 32 FM Radio Key operation Press middle joystick: Save selected frequency to the Volume up preset list Press quickly : Press quickly: Frequency decreases Frequency increases by 50kHz. by 50kHz. Press it for 1 sec.: automatic frequency searching Press it fo1 sec.: automatic frequency searching Go to previous menu Volume down...
Page 33: Photo Viewer
Photo viewer Getting started (3) Select the file you want to see (2) Select the Photo Viewer in the main menu (1) Press and hold the power button. with the up and down button and press in the middle of navigation key. in the navigation key.
Page 34 Photo viewer Key operation Press middle joystick : Zoom in/out : normal, 2x, 4x Rotate image CW Previous image Next image Rotate image CCW Go to previous menu Popup setup menu Hold key LCD off key Power On/Off Press and hold it for 2sec.
Page 35 Photo viewer Menu contents Decide which of the file information will be shown Image Info among the file name, size, resolution etc. Select On / Off to set. Enable automatic slide view function. Select the time interval to move to the next photo. Slid Show (2 sec, 5sec, 10sec) Time...
Page 36: File Browser
File browser Getting started (1) Press and hold the power button. (2) Select the File browser in the main menus and press select button. (4) Press menu button to see the other available (3) To move to other folder, press menus in the file browser.
Page 37 File browser Key operation Up cursor Press middle joystick: Play selected file or change directory Change directory / file area Change directory / file area Down cursor Go to previous menu Popup setup menu Hold key LCD off key Power On/Off Press and hold it for 2sec.
Page 38 File browser Copying files (1) Move cursor to the file (2) Press menu button and that you want to copy. select copy. Message contents : (3) Press select button Move to the folder to place the file (There will be message.) and press MENU to copy.
Page 39 File browser Moving files (2) Press menu button and (1) Move cursor to the file select ‘move’. that you want to move. Message contents : (3) Press select button Move to the folder to place the file (There will be message.) and press MENU to move.
Page 40 File browser Deleting files (2) Press menu button and (1) Move cursor to the file select ‘Del’. that you want to delete. (3) Press select button Message contents : (There will be message.) Are you sure to delete the file? (5) When the process completed, (4) Press menu button.
Page 41 Recording Getting started (1) Press and hold the power button. (2) Select the Recording in the main menus and press select button. (4) When there is not input signal “Low Signal” message will be appear on the screen. (5) To stop the recording, press ESC button. The files created will be placed in the Low Signal recording folder.
Page 42 Recording Key operation No operation for recording Press middle joystick Start recording No operation for recording No operation for recording Goto previous menu No operation for recording Hold key LCD off key Power On/Off Press and hold it for 2sec.
Page 43 Setup Select the Setup in the main menus and press select button. LCD display Video Setup, Audio Setup, Photo Setup, System Setup are in the Set up menu. By choosing menu button in other player mode, you can connect directly to setup menu. About each menu’s setup except system set up, please refer to the each menu.
Page 44 Setup System Setup – LCD Sleep To save the battery, you can enable the LCD sleep function. There are option for 1 min, 5min, 10min and off. When any audio or video file is not played, and there isn’t any input signal to the device, the device can disconnect the signal to LCD temporarily screen to save the power consumption.
Page 45 Setup System Setup – Power Sleep To save the battery, you can enable the LCD sleep function. There are option for 1 min, 5min, 10min and off. When any audio or video file is not played, and there isn’t any input signal to the device, the device can turned off automatically to save the power consumption.
Page 46 System Setup – Inner Speaker This unit have built-in stereo speaker. When you plug in the earphones to the Looket, the built-in speaker will be disabled. But if you want to save the battery more, you can turn off the...
Page 47 Setup System Setup – Date Time You can set the date and time. When you turn on the device first time, the time might not be correct depending on your countries. Please set the right date and time for your location. When the unit is not used for a long time, the time can be initialized.
Page 48 Setup System Setup – Firmware Update 다음 단계에 따라 Firmware Update를 실행한다. ※ Update를 하기 전에 AC Adapter를 반드시 연결하여야 한다. → 본 PMP의 최상위 폴더에 Upgrade할 파일을 USB를 이용하여 PC에서 복사한다. → PMP의 상위 메뉴에서 Setup으로 들어간다. → Setup메뉴 중에서 System을 선택한다. →...
Page 49: Additional Information
Additional Information...
Page 50: Troubleshooting
Use the other USB cable or other port of computer. When you use extention cable, please check the cable is connected fully. Depending on the hardware of some computer, the Looket might not be recognized. Please contact us to solve this problem.
Page 51: Specification
Specification File Formats Video Support Codec MPEG4 Simple profile, XviD, WMV9 Divx3.11, 4, 5, 5pro Support File Format AVI, ASF, WMV Output Format NTSC / PAL Composite video output 75Ohm Encoding MPEG 4 simple profile, ASF file format Audio Support Codec MP3, WMA, AC3, OGG, G.726 Encoding G.726...
Page 52: Technical Specification
Specification Technical Specification Display 3.5” TFT Landscape LCD, 16.7 Million color, QVGA 320x240 pixel Viewing angle : 60 degrees(Right & Left) 20GB, 1.8 inch, FAT32 Interface USB2.0 Slave(max 480Mbps) USB1.1 Host full speed Audio Audio output : Max 40mW Bandwidth : 8 ~ 96kHz Bit rate : 32kbps ~ 320kbps SNR : 97.0dB...
Page 53: Warranty
Warranty Sysonchip, Inc. warrants Looket PMP against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. The warranty period of a rechargeable battery and consumables are six (6) months from the date of purchase.
Page 54 This limited warranty gives you specific legal right, and you may also have other rights that vary from jurisdiction to jurisdiction ※ HDD, LCD warranty Looket PMP is portable device, therefore the free warranty cannot apply to HDD and LCD when it damaged from misusing or abuse. ※ Power supplies and cables Any damages from using power supplies or cables which are not provided or officially approved by the manufacture cannot be included in the warranty.
Page 55 FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.

This manual is also suitable for:

P30 P40