Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Doran 360SL
- Page 1 Doran 360SL Programming Tool Operations Manual...
- Page 2 I. INTRODUCTION The Doran 360 tool was designed to work with the Doran 360SL system. This tool is used to program all of the information for the trailer wheel sensors into the SmartLink booster. Once programmed, the booster will relay the information from the assigned sensors on the trailer to a tractor s monitor in the cab.
- Page 3 Entering data is as easy as sitting at your desk and inputting the information for transfer to the Booster. Turn on the SL tool using the button on the lower left side of the tool. The Doran Programming tool welcome display will be shown.
- Page 4 III. ENTERING DATA INTO THE TOOL The reason for this is that the tool will grab the first signal that it sees, and it may not be the one that you are intending to work with. If there are not any trailers within a 50-foot radius you should not have any trouble using the tool without setting the trailer ID number.
- Page 5 III. ENTERING DATA INTO THE TOOL 5. When you are sure the number that you input into the tool is correct you can press the ENTER button to lock this number into the programming tool. 6. To select the Trailer ID number use the up and down arrow buttons to move the arrow to select this and press the ENTER button.
- Page 6 When this operation is completed the booster will now be ready to hookup to a tractor that is equipped with the Doran 360SL system and will be ready to monitor the trailer tires as well as the tractor tires that were programmed to the 360SL monitor.
-
Page 7: Limited Warranty
The exclusive remedy for any product determined by DORAN Mfg. LLC to be defective within such period shall, at the sole option of DORAN Mfg. LLC, be the repair or replacement of such defective product, or the refund of the purchase price therefore. No other remedy shall be available. - Page 8 PROCEDURE: Products determined to be defective within the terms of this Limited Warranty should be returned to Doran Mfg. LLC, transportation prepaid. Call DORAN Mfg. LLC for return authorization. No unauthorized returns shall be accepted. Sender is responsible for all costs incurred in the removal or reinstallation and shipping of the returned product.
-
Page 9: Fcc Warning
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the 360SL and is the answer not in the manual?
Questions and answers