Page 1
Owner's Manual MM-627AMY MM-524AMW Contents RECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE ....MICROWAVE ENERGY MPORTANT SAFETY INSTRUCTIONS eavy ommercial icrowave Keep these instructions for future reference. If the oven changes ownership, this manual must accompany oven.
Page 2
Report No.: 03-LAE-M146 FCC Part 18 (ISM) Date: June 30, 2003 Certification APPENDIX F. Owner’ s Manual with regard to FCC Instruction LG Electronics Inc. FCC ID: BEJC520ZK...
IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message WARNING PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY DO NOT DO NOT DO NOT SAVE THESE INSTRUCTIONS...
Page 5
IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING CAUTION Popping time varies depending on oven wattage. SAVE THESE INSTRUCTIONS...
Installation Unpacking Oven • Inspect oven for damage such as dents in door or inside oven cavity. • Report any dents or breakage to source of purchase immediately. Do not attempt to use oven if damage. • Remove all materials from oven interior. •...
Display and Features Single Pad Programming If These Features are Different from Yours These features are intended to show the variety that is available in the product line. If your microwave does not have all the options that are shown, it is not a mistake. The information provided applies to several Double Pad Programming of the models in the product line.
Display and Features Cooking Display DISPLAYS DESCRIPTION MICRO DEFR WARM MEDHI POWER HOLD 88:88 TIMER 5($'< displays when oven control will accept READY 5($'< COOK CLOCK LEVEL entries. Displays cooking time. If stage cooking is 00:00 Display programmed, total cooking time is displayed. '()5 Some items in the display can be seen but These settings display the current power level used...
Using the Oven Control (Electronic Control) Interrupting Manual Time Entry STOP Operation Time READY Entr y READY 0000 COOK LEVEL Med. Do I have stage programming? Stage programming is a hidden feature—it is not shown with a pad on the oven. To verify that your microwave has stage programming, refer to the Quickstart Guide provided START...
Programming the Oven Control (Electronic Control) The display shows Programming Pads User Option When set to double pad programming, the display will show when programming pads for double digit READY cooking sequences. To change the oven to default to allow single pad programming only, see the User Option section.
User Options (Electronic Control) Didnt like an option? Changing user options Factory settings are marked in bold. To change the oven back to the factory setting, simply select the option that is marked in bold. My changes werent saved. In order for any changes to be saved, the START pad must be pressed after selecting an option.
Dial Operation Dial option is available on some models only. If These Features are Different from Yours These features are intended to show the variety that is available in the product line. If your microwave does not have all the options that are shown, it is not a mistake.
Care and Cleaning Replacing Oven Light 1. Disconnect electrical supply. WARNING 2. Remove screw from back of oven. 3. While wearing protective gloves, To avoid electrical shock which turn light bulb counterclockwise to can cause severe personal remove. injury or death, unplug power 4.
Before Calling for Service WARNING To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time. Only an authorized servicer should remove outer case. An authorized servicer MUST inspect equipment annually. Record all inspections and repair for future reference.