3-1 EHS Control Kit
Be sure that the power switch is in the OFF and the power source cord shall be unplugged prior to disassembly and reassembly works.
No
Parts
1
CABINET TOP
2
ELCB
12
Procedure
You must turn off the power before
disassembling.
1) Unscrew and remove the two screws
on the CABINET TOP.
(Use '+' type screw driver)
2) Remove the CABINET TOP.
1) Unscrew and remove the two screws of the
power supply cable on the terminal block.
(Use '+' type screw driver)
2) Unscrew and remove the two screws on the
top & bottom of the ELCB.
(Use '+' type screw driver)
Remark
Samsung Electronics