Advertisement
Quick Links
Advertisement
Summary of Contents for Perfect Home Theater FLM-7
- Page 1 2014...
- Page 2 USER Thank you for your purchasing of our FLM-7 product. FLM-8 If you have any questions that are not MANUAL covered in this manual, please contact us by phone or e-mail at Sales@PerfectHomeTheater.com. P2-12...
-
Page 3: Specification
Specification Chassis Material: Full aluminum, Colors: Silver / Black Motherboard Support : Mini-ITX Hard Drive Bays: 1 x 2.5″ + 1 x 3.5″ or 2.5″ (shared bay) Optical Drive Bays: 1 x Slim slot loading drive, universal eject button (with FLM-8 only) Ports: 2 x USB2.0, Front side (USB3.0 Ready, cable sold separately) Expansion Slot: 1 x half height expansion slot Cooling: Fanless... - Page 4 Overview Power Button & LED Heat Sinks ODD Eject Button (FLM-8) HDD/ODD tray USB Ports 2.0 & 3.0 on the side PCI Expansion Slot IR Receiver Window Power Button PCB Removing top panel. Attention: Our chassis are built with very small gaps between front, top and back, so please be careful when removing and reinstalling top panel.
-
Page 5: Motherboard Installation
Motherboard installation Before installing motherboard into chassis please stick four CPU cooler mounting nuts on the bottom of Motherboard. Next install CPU and memory on Mobo, install backplate and motherboard inside of chassis. Next install CPU and memory on the Mobo, install backplate and motherboard inside of chassis. -
Page 6: Cooling System
Cooling system These are the following parts of cooling system: 1.Lower CPU plate 2.Upper CPU plate (Intel or AMD) 3.Standard or short Heat Pipes (Attention: heat pipes are numbered.) 4.Heatsink blocks with thread. 5.Four screws for Cooling system (M3x10) 6.Thermal paste. (Supplied) Mini ITX motherboard. - Page 7 DO NOT TIGHTEN ANY SCREWS UNTIL INSTALLATION IS FINISHED. First assembly cooling system without paste, to find out the best position for pipes but do not tighten screws yet. Next put it on CPU allign with CPU and move pipes toward or away from radiator if nesesary.
- Page 8 Then put another two screws and set up assembly over CPU perfectly. Now you can tighten screws. First, Four screws in heatsink blocks. Pipes still can move toward heatsink. Next, use supplied wrench and tighten screws keeping both plates together. Do not over tighten screws! At last, hand tighten long screws and you just finished installation of cooling system for your...
- Page 9 Now it’s time to connect PSU and cables Installing HDDs and ODD. ODD/HDD bracket is hold in place by four screws. Please remove screws and remove ODD/HDD bracket. P9-12...
-
Page 10: Installing Pci Card
Now you can install drives on the bracket. First 2.5” HDD on the bottom. (If you install two 2.5” HDs). Next install SSD and ODD on the top. If you didn’t install 2.5” HD and want to install 3.5” HD, do it now. - Page 11 Picture Description/Type Quantity Application Not in scale M2x3 It should be Slim ODD drive (FLM-8 only) M3x4 M3x4 Motherboard M3x5 2.5” HDD 6-32x6 3.5” HDD M3x10 Heat sink blocks M3x10 Heat sink plates CPU retention screws Heat sink mounting screws Mounting nuts Heat sink mounting nuts Nuts shock pad...
- Page 12 Perfect Home Theater 163 America Blvd Ashland, MA 01721-1869 www.shop.perfecthometheater.com Perfect Home Theater 163 America Blvd Ashland, MA 01721-1869 www.shop.perfecthometheater.com...