Advertisement
Quick Links
1A
Parts in the Body Box:
1B
Hardware in this Box:
Bolts (60mm) x 6
For the Advance Arms
and the Foot Connector Bar
Plastic Runner
x 2
Assembly Instructions for all sizes.
Strata Furniture:
Back Deck x 1
Stretcherx 2
Long Clevis Pins
x 2
Bungies
x 2
Carriage Body
Short Clevis Pins
x 2
Screw
x 4
Seat Deck x 1
with the Feet attached
Foot Connector Bar x 1
Advance Arms x 2
Washers
Locking Pins
x 6
x 4
Strap
x 1
CAR 0705
Sleeve
x 2
Long Allen Key
x 1
Page 1 of 6
Advertisement
Summary of Contents for Strata Lambton
- Page 1 Carriage Body Strata Furniture: CAR 0705 Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Foot Connector Bar x 1 Stretcherx 2 Advance Arms x 2 Hardware in this Box: Bolts (60mm) x 6...
- Page 2 Carriage Body Strata Furniture: CAR 0705 Fit the Wooden Dowels into the Stretchers. Attach the Arms to the Stretchers. Be patient, it can be tricky to start the bolts in the nuts - A screwdriver will help you line up the Barrel Nut with the Bolt.
- Page 3 Carriage Body Strata Furniture:...
- Page 4 Carriage Body Strata Furniture:...
- Page 5 Carriage Body Strata Furniture: CAR 0705 Fit the Seat and Back Decks to the Frame. Tighten all the Bolts. Tighten all the Bolts Connect the Advance Arms to the Arms. Back Deck All joints must be left loose. Advance Arm All joints must be left loose.
- Page 6 Carriage Body Strata Furniture: CAR 0705 Fit the Strap to the Back Deck. Operating Instructions: To convert into couch position: • Remove any pillows and other obstructions. Reach to the back and lay the strap on top of the mattress.
Need help?
Do you have a question about the Lambton and is the answer not in the manual?
Questions and answers