11.1 Functionality
When a Motion Detection schedule is active (See 7 Setting up a Schedule for more info), the camera will turn on and
process the selected action any time it registers motion. If the Action is Photo or Multishot, the camera will just take a
single image or burst images respectively. If the Action is Video, the camera will record when motion occurs and
continue for programmed time once motion is no longer detected. If movement is detected before the recording time
elapses, the recording interval will be reset to ensure you capture the entire motion event.
11.2 X-Band Orientation
Connect the 3.5mm audio connector to Blink. Then connect the 4 pin header as shown in the image below. The X-Band
detects motion facing the opposite side of the sensitivity dial. Note also the mounting instructions below.