Summary of Contents for GOVCOMM Owl GC-IMPO-FIZ23L
- Page 1 ITS Camera Systems Installation and User Manual Sales@GovComm.us | 305-937-2000 | 2650 Biscayne Blvd, Miami, Florida 33137 © GovComm, Inc. 2017...
-
Page 2: Safety Instruction
Thank you for purchasing GovComm’s network ITS Camera product. If there are any technical or general questions, concerns or requests, please contact us through our website www.GovComm.us, by email Sales@ GovComm.us or by telephone 1+305-937-2000. This manual may contain several technical or printing errors, and the content is subject to change without notice. - Page 3 • We recommend installation of a back-up power supply in the event of electrical supply interruption. • If the product does not work properly, please contact GovComm. Never attempt to disassemble the product yourself. (GovComm does not assume any responsibility for problems caused by unauthorized repair or maintenance.)
-
Page 4: Table Of Contents
3.5.3 Configuring Text Overlay Settings ........41 Sales@GovComm.us | 305-937-2000 | 2650 Biscayne Blvd, Miami, Florida 33137... - Page 5 3.6.6 Handling Exception ..........49 Sales@GovComm.us | 305-937-2000 | 2650 Biscayne Blvd, Miami, Florida 33137...
-
Page 6: Overview
Display: 1024×768 resolution or higher Web Browser: Internet Explorer 7.0 and above version, Apple Safari 5.02 and above version, Mozilla Firefox 3.5 and above version. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 7: Opening And Installing A Govcomm Camera
3. Download the discovery tool from http://govcomm.us/downloads/SADPTool.zip. » All GovComm cameras that are connected to the same switch (Layer 2 network even if the IP address of the camera is different from the IP schema). The default IP address for GovComm ITS cameras is http://192.168.1.64... -
Page 8: Poe, Poe+ And High Poe
• GovComm PTZ Eagle cameras use 24 VAC or High PoE only. • GovComm PTZ Hawk cameras use 24VAC or PoE+ (35 W) or High PoE (60 W= 2 x 30W channels). PoE+ uses 4 wires mid-span to power the camera while High PoE uses all 8 wires (4 pairs). - Page 9 ITS Camera System - Installation and User Manual Image 1 Image 2 Image 3 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 10: Focus Distance Configuration For Govcomm Ptz Cameras Explained
• When on “Manual” the camera will never adjust automatically. The focus can be adjusted manually from the focus control buttons. 2. GovComm ITS cameras come with several minimum focus distance options which is where the automatic focus begins to engage. On a windy day, a tree’s branches waving within the minimum focus distance can cause erratic engaging and disengaging of the automatic focus, so the user can set a further minimum focus distance to avoid unnecessary adjustments and image degradation. -
Page 11: Recording Videos And Capturing Screen Shots From Browser
5. In the Internet Options window, click the Security tab. 6. On the Security tab, click the Trusted sites icon. 7. Click the Sites button. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 12 10. Click the Close button. 11. In the Internet Options windows, click OK. 12. For the changes to take effect, all open browsers may need to restart. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 13: Steps To Troubleshoot Ip Camera
There can be many reasons for that, the most common being that the camera and the computer are on different networks or subnets. If there are proper connection replies, use a web browser forthe camera. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 14 To troubleshoot, use a cable tester to test the cabling or use a known 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
- Page 15 It may be best to wait until after calling tech support before trying this step. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 16: Troubleshooting Govcomm Its Cameras
1. If a Moxa HiPOE injector and GovComm PTZ camera are being used make sure to have the injec- tor configured in 4 pair mode and HiPower. see attached screen shot. -
Page 17: Ptz Configuration
The user can configure the basic PTZ parameters, including proportional pan, preset freezing, preset speed, etc. 1. Enter the Basic PTZ Parameter Configuration interface: Configuration > PTZ > Basic Settings 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 18 » Power-off Memory: The dome can resume its previous PTZ status or actions after it restarted from a power-off. The user can set the time point of which the dome resumes its PTZ status. The 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 19: Configuring Ptz Limit Stops
4. Click Set to save the limits or click Clear to clear the limits. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 20: Configuring Scheduled Tasks
Click on the bar to be able to Input the Start Time and End Time for each task. » (3) Choose the task type from the drop-down list. The user can choose scan, preset, pattern and etc. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 21: Configuring Park Actions
3. Set the Park Time as the inactivity time of the dome before it starts the park actions. 4. Choose Action Type the from the drop-down list. 5. Click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 22: Configuring Privacy Mask
7. Check the checkbox of Enable Privacy Mask to enable this function. The user is allowed to draw up to 24 areas on the same image. Note: 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 23: Configuring Smart Tracking
1. Enter the Clearing Configuration interface: Configuration > PTZ > Clear Config 2. Check the checkbox of the items the user wants to clear. 3. Click Save to clear the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 24: Its Camera Configuration
Please set Live View Performance as Best Fluency for the high frame rate ITS Note: Camera. » Rules: The user can enable or disable the rules of dynamic analysis for motion here. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 25: Configuring Time Settings
There are Time Zone, Time Synchronization, Daylight Saving Time(DST) functions for setting the time. Time Synchronization consists of auto mode by Network Time Protocol(NTP) server and manual mode. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 26 When the ITS Camera is taken to another time zone, the user can use the Time Zone function to adjust the time. The time will be adjusted according to the original time and the time difference between the two time zones. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 27: Configuring Network Settings
TCP/IP settings must be properly configured before the user operates the ITS Camera over network. IPv4 and IPv6 are both supported. Steps: 1. Enter TCP/IP Settings interface: Configuration > Network > Basic Settings >TCP/IP 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 28: Configuring Port Settings
3 ports for the ITS Camera. Steps: 1. Enter the Port Settings interface: Configuration > Network > Port 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 29: Configuring Pppoe Settings
Registration on the DDNS server is required before configuring the DDNS settings of the ITS Camera. Steps: 1. Enter the DDNS Settings interface: Configuration > Network > DDNS 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 30 The Server Address should be entered with the static IP address of the computer that runs the IP Server software. For the IP Server, apply a static IP, subnet mask, gateway and preferred DNS from the ISP. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 31: Configuring Snmp Settings
The configuration of the SNMP software should be the same as the settings Note: configured here. 4. Click Save to save and finish the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 32: Configuring 802.1X Settings
1. Connect the network camera to the PC directly with a network cable. 2. Enter the 802.1X Settings interface: Configuration > Network > Advanced Settings > 802.1X 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 33: Configuring Qos Settings
• Setting the directory in FTP server for saving files: In the Directory Structure field, the user can select the root directory, parent directory and child directory. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 34: Configuring Nat Settings
Steps: 1. Enter the UPnP settings interface: Configuration >Network> Basic Settings > NAT 2. Check the Enable UPnP checkbox 3. Add a Friendly Name. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 35: Configuring Email Settings
Please configure the DNS Server settings under Configuration > Network > Basic Settings > TCP/ IP before using the Email function. Steps: 1. Enter the Email Settings interface: Configuration > Network > Email 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 36: Configuring Video And Audio Settings
3.4 Configuring Video and Audio Settings 3.4.1 Configuring Video Settings Steps: 1. Enter the Video Settings interface: Configuration > Video / Audio > Video 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 37 The user can set the profile level to High Profile, Main Profile or Basic Profile. I-Frame Interval: Set the I-Frame interval from 1 to 400. 4. Click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 38: Configuring Audio Settings
4. Adjust the Enhance the level from 1 to 6. The higher the value, the better image quality in the red frame. 5. Enter a Region Name and click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 39: Configuring Image Settings
• The user can double click the live view to enter full screen mode and double click it again to exit. Steps: 1. Enter the Display Settings interface: Configuration > Image> Display Settings 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 40 Sharpness function enhances the detail of the image by sharpening the edges in the image. The value ranges from 0 to 100. This function varies depending on the models of the ITS Camera. Note: 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
- Page 41 The value of gain needs to be adjusted manually. The shutter and iris values will be adjusted automatically according to the brightness of the environment. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
- Page 42 In Day mode, the ITS Camera displays color image. It is used for normal lighting conditions. » Night: In Night mode, the image is black and white. Night mode can increase the sensitivity in low light conditions. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
- Page 43 In MWB mode, the user can adjust the color temperature manually to meet special requirements. » Outdoor The user can select this mode when the ITS Camera is installed in outdoor environment. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
- Page 44 The flip direction can be set to OFF, LEFT/RIGHT, UP/DOWN or CENTER. Note: This function varies depending on the models of the ITS Camera. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 45: Configuring Osd Settings
The user can customize the on screen display of time. Steps: • 1. Enter the OSD Settings interface: Configuration > Image > OSD Settings 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 46: Configuring Text Overlay Settings
4. Use the mouse to click and drag the red text frame Text in the live view window to adjust the text overlay position. 5. Click Save. Note: There are up to 8 text overlays configurable. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 47: Configuring And Handling Alarms
The user can click Clear All to clear all of the areas. Note: » (5) Move the slider to set the diversity of the detection. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 48 » (4) Click Save to save the settings. Note: The time of each period can’t be overlapped. Up to 4 periods can be configured for each day. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 49: Configuring Video Loss Alarm
3. The arming schedule configuration is the same as the setting of the arming schedule for motion detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 3.6.1. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 50: Configuring Tamper-Proof Alarm
2. Check Enable Tamper-proof checkbox to enable the tamper-proof detection. 3. Set the tamper-proof area. Refer to Step 1 Set the Motion Detection Area in Section 3.6.1 Configuring Motion Detection. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... - Page 51 Please refer to Step 3 Set the Alarm Actions for Motion Detection in Section 3.6.1 Configuring Motion Detection. 6. Click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
-
Page 52: Configuring External Alarm Input
No. to enable Preset Calling, Patrol Calling or Pattern Calling. 7. The user can copy the settings to other alarm inputs. 8. Click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 53: Configuring Alarm Output
Motion Detection in Section 3.6.1 Configuring Motion Detection. 6. The user can copy the settings to other alarm outputs. 7. Click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017... -
Page 54: Handling Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 3.6.1 Configuring Motion Detection. 3. Click Save to save the settings. 2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us © GovComm, Inc. 2017...
Need help?
Do you have a question about the Owl GC-IMPO-FIZ23L and is the answer not in the manual?
Questions and answers