Advertisement
The LOAD (i.1 pos.5 and 12) switch allows you to adjust the input impedance that the
cartridge sees. With all switches OFF the load impedance is 47k ohms. This is suitable for MM
cartridges. MC cartridges generally like to see higher impedance and the manufacturer will
usually state the optimum in the cartridge specifications. However it is best to adjust this by
ear. You can progressively switch the DIP switches ON to increase the impedance. As you do so
the sound will become progressively tighter and cleaner. As you pass the optimum position
the sound will become slow and dull. Therefore you will want to settle on a position where the
cartridge sounds lively but controlled. This will generally be just before it starts to slow down in
perceived sound.
47 kohm
100 ohm
1 000 ohm
50 ohm
4
400 ohm
30 ohm
200 ohm
20 ohm
Advertisement
