Advertisement
4.
Enter the number of active stations or zones used
by the controller.
5.
Click Submit.
After a controller is added, it is possible to start and stop
watering, manually activate individual stations, test all
stations, give each station a descriptive name, and more.
Add Scene
A location can have up to 4 scenes.
1.
On the Lighting and Auxiliary tab, select +Add a
Scene.
2.
Enter the name and description.
Add a photo, if desired.
3.
Under Schedule A, enter the days of the week and
time of the Scene.
It is possible to have an A Schedule and a B
Schedule for each scene. For example, one might
want security lights to stay on longer on Friday and
Saturday nights.
4.
Add an additional time by clicking Add another
time.
5.
Click Add Scene to complete the setup.
Add EVO-ARs or LPCU-As to the
SMRTscape™
EVO-ARs and LPCUs provide
wireless control of up to four
scenes which can be used for
lighting, irrigation, or any 120AC
device.
1.
Adding EVO-ARs on the
Lighting and Auxiliary tab
of SMRTscape will provide
additional functionality
not currently available
2. At the SMRTscape website, click the Lighting and
Auxiliary tab at the top of the screen. Click on the
blue gear icon (
Press the Activate discovery mode button.
3. Press the button on the EVO-AR or LPCU-A when
prompted.
4. After a few seconds, the SMRT Logic PLUS should
detect the LPCU-A. Assign the scene and enter a
description.
5. Press Add LPCU when done.
6. Repeat steps 1-4 for each LPCU-A to add.
Edit SMRT Logic Equipment
Click the blue pencil icon (
such as name, description, number of stations, and
more.
Delete SMRT Logic Equipment
To delete a controller, click the blue pen to edit the
controller, then click Delete Irrigation Controller.
Update the Firmware
If a firmware update is available for either the SMRT
Logic unit or the controller, a Manage Firmware
command will be displayed under 'Hardware' on the
Location screen.
Click the link to
update hardware.
Select the De-
vice(s) and click
Update Firmware
to start.
Support
Check the website for FAQ and detailed instructions. To
submit a help ticket, click on the Contact link then the
Submit a Ticket link.
LPCU / EVO-AR
in EVOLUTION. For that reason, if you use the
AUX-2 or AUX-3 programs at the EVOLUTION
controller, disable them. (See EVOLUTION user
guide for instructions on how to disable AUX-2 and
AUX-3 programs.)
) and select Configure Devices.
To add an LPRO, click Activate Discovery
Mode then power cycle the LPRO. The LPRO
may require a firmware update after adding. A
notification will be shown under Hardware on the
Location page.
) to edit controller settings
Advertisement
