Summary of Contents for Offshore Dynamics 4166
- Page 1 OFFSHORE DYNAMICS DUAL ENGINE DISPLAY Part Numbers: 4166 USER MANUAL Revision A\V1.0.0...
-
Page 3: Table Of Contents
Introduction............Product features..........Unit dimensions..........Installation............Unpacking the box..........Mounting the unit..........Connecting the marine display......Selecting engine manufacturer & device set up..Mounting the Control Panel........ Button functions..........Technical support..........Warranty............1 of 10... -
Page 4: Introduction
INTRODUCTION The Offshore Dynamics NMEA2000® Dual Engine Display has a 10.4” diagonal display area and has a high bright sunlight readable 1000 cd/m2 display. The Dual Engine Display can monitor two user selectable engines simultaneously, with alarm monitoring and logging. -
Page 5: Unit Dimensions
UNIT DIMENSIONS Dual Engine Display 199.5 52.4 199.5 3 of 10... -
Page 6: Installation
INSTALLATION 3.1 UNPACKING THE BOX You will find the following items in the shipping box: 1 x Dual Engine Display 1 x Remote button panel 1 x DC Power cable 1 x Bag containing 4 thumbwheel nuts & 4 sprung washers for button panel 1 x Bag containing 4 screws &... - Page 7 5. The unit should be sealed to the mounting surface using a suitable silicone sealant. This Silicone sealant will be part of the seal used to provide the IP rating for the product. 6. Using the 4 mounting clamps to the rear of display secure the unit to the mounting surface by tightening the screws.
-
Page 8: Connecting The Marine Display
3.3 CONNECTING THE DUAL ENGINE DISPLAY Before making any connections to the unit, ensure the NMEA2000® bus power and DC supply are turned off. Connect NMEA2000® cable to ‘Socket’ on the back of the unit, observing correct orientation to ensure the keyway aligns. The cable can be extended up to 6mtrs and connect into the T-adapter on the network backbone. -
Page 9: Selecting Engine Manufacturer & Device Set Up
3.4 SELECTING ENGINE MANUFACTURER & DEVICE SET UP Situated on the rear of the unit is an 8 Way Configuration switch & Rotary Switch. Their functions are as follows: Configuration switch Switch No. Switch OFF Switch ON Imperial units Metric Units One fuel display bar Two fuel display bars Two engine displays... -
Page 10: Mounting The Control Panel
3.5 MOUNTING THE CONTROL PANEL Please see line drawing showing outline, mounting studs and mounting area for the Control Panel. Mounting cut out template should be used as a reference for installation. FRONT VIEW 102,50 TOP VIEW Mounting studs PANEL MOUNT CUTOUT Mounting studs 90.5... -
Page 11: Button Functions
USER CONTROLS The Remote panel is provided with a 1m cable tail for situation away from the Display. 4.1 BUTTON FUNCTIONS BRIGHT ALARM MUTE Button Function Each press will decrement the brightness level, holding the button will continue to decrement until the minimum level is reached. BRIGHT Each button will increment the brightness level, holding the Button will continue to increment until the minimum level is reached. -
Page 12: Technical Support
Email: sales@osukl.com Web: www.osukl.com Copyright © 2016 Offshore Dynamics Ltd. All rights reserved. Our policy is one of continuous product improvement so product specifications are subject to change without notice. Offshore Dynamics products are designed to be accurate and reliable. -
Page 13: Warranty
Offshore Dynamics; or if Offshore Dynamics is unable to deliver a replacement that is free from defects in materials or workmanship, Purchaser’s payment for such product will be refunded. Offshore Dynamics assumes... - Page 14 12 of 10...