Subscribe to Our Youtube Channel
Related Manuals for ROMAN RAPID X 300
Summary of Contents for ROMAN RAPID X 300
- Page 1 RAPID X 300 6 PERSON QUICK UP TENT Owners Manual IMPORTANT Please read instructions carefully. Familiarise yourself with the product before use. Keep these instructions for future reference. Part No. ROM2489...
- Page 2 Owners Manual WARNING! KEEP ALL FLAME AND HEAT SOURCES AWAY FROM TENT AT ALL TIMES. The following precautions should be taken when camping: • DO NOT: Use candles, matches or open flames of any kind in or near a tent •...
- Page 3 Owners Manual COMPONENTS A. 1 x Inner tent B. 1 x Flysheet C. 1 x Carry bag D. 2 x Awning poles E. 1 x Flysheet pole F. 8 x Guy ropes G. 14 x Pegs 14 x Pegs Distributed by Companion Brands Bundoora VIC 3083 www.companionbrands.
-
Page 4: Tent Assembly
Owners Manual TENT ASSEMBLY Before assembling the tent: • Read all set up instructions • Check overhead for any dangerous branches or power lines • Note: A minimum of TWO PEOPLE are required • Do not set up tent under large trees or branches to set up and dismantle this tent •... - Page 5 Owners Manual SECURE THE INSERT POLE INTO FLYSHEET FLYSHEET Secure all fasteners to poles (A) Insert shock corded pole through sleeve in front and buckles at base (B) on all four corners. dome section of flysheet. Insert base pins into both sides of the pole ends to secure.
- Page 6 Owners Manual DISMANTLE THE TENT • Ensure all doors are zipped almost closed, leaving space to allow air to escape when re-packing. • Store the shock-corded poles and pegs in their corresponding bags to prevent damage to the fabric. REMOVE PEGS/ DISASSEMBLE POLE COLLAPSE AWNING FROM FLYSHEET...
- Page 7 Owners Manual GATHER CORNERS ROLL TIGHTLY Gather all of the corners together so the hub is at the bottom. Gather the excess fabric together by rolling tightly. PACKING THE TENT CARING FOR YOUR TENT • DO NOT machine wash • Spot clean shelter and hand wash flysheet only •...
-
Page 8: Troubleshooting Guide
Owners Manual TROUBLE SHOOTING GUIDE This troubleshooting guide is designed to give you years of fun and enjoyment from your tent. PROBLEM SOLUTION PROBLEM SOLUTION This is caused by lower temperatures on The zipper separates, you can move the the outside of the tent combined with body slider to the beginning of the zipper tape heat on the inside of the tent.
Need help?
Do you have a question about the RAPID X 300 and is the answer not in the manual?
Questions and answers