Table of Contents
Advertisement
Quick Links
Sip Vacuum Cleaner 1400/20 Wet & Dry
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with your
domestic waste. If your supplier offers a disposal facility please
use it or alternatively use a recognised re-cycling agent. This will
allow the recycling of raw materials and help protect the envi-
ronment.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
07907
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
Ref: 010316
20
1
Advertisement
Table of Contents
Summary of Contents for SIP 1400/20
- Page 1 Sip Vacuum Cleaner 1400/20 Wet & Dry Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate recycling bin.
- Page 2 LE12 9NH England As the manufacturer's authorised representative within the EC declare that the Sip Vacuum Cleaner 1400/20 Wet & Dry - SIP Part No. 07907 Conforms to the requirements of the following directive(s), as indicated. 2006/95/EC Low Voltage Directive...
-
Page 3: Table Of Contents
NOTES CONTENTS Page No. Description Safety Symbols Used Throughout This Manual Safety Instructions Guarantee Electrical Connection Technical Specifications Contents & Accessories Getting to Know Your Vacuum Cleaner Assembly Instructions Operating Instructions Maintenance Exploded Diagram Parts List Declaration of Conformity... -
Page 4: Safety Symbols Used Throughout This Manual
Read all these instructions before operating the tool and save this user manual for fu- ture reference. SIP recommends that this vacuum cleaner should not be modified or used for any application other than that for which it was designed. It is designed to vacuum car- pets, floors etc. - Page 5 (e.g. pipes, radiators, hobs and refrigerators, etc.). It is advisable wherever possible to use an RCD (residual current device) at the mains Ref. No. Description SIP Part No. Ref. No. Description SIP Part No. socket.
- Page 6 SAFETY INSTRUCTIONS….cont EXPLODED DIAGRAM Never collect hot objects such as dust or ashes etc. Never operate the vacuum cleaner without the hose attached securely and correct- ly fitted. If the vacuum cleaner is used in a place of work all rules and laws etc. relating to the use of portable electrical appliances should be followed.
-
Page 7: Guarantee
GUARANTEE The SIP vacuum cleaner is covered by a 12 month parts and labour warranty covering failure due to manufacturers defects. This does not cover failure due to misuse or op-... -
Page 8: Electrical Connection
ELECTRICAL CONNECTION OPERATING INSTRUCTIONS….cont These vacuum cleaners are double insulated. This means the operator is Note: The foam filter must be fitted and the collection bag must be removed separated from the tool's electrical system by two complete sets of electrical before using it for wet vacuuming. -
Page 9: Technical Specifications
Push the collection bag over the back of the hose connector (see below). Refit the motor housing and secure both clamps. SIP Code 07907 Description Sip Vacuum Cleaner 1400/20 Wet & Dry Collection Bag Input Voltage 230V ~ 50hz Power... -
Page 10: Getting To Know Your Vacuum Cleaner
GETTING TO KNOW YOUR VACUUM CLEANER ASSEMBLY INSTRUCTIONS Fit the attachment holder on to the base of the container (below left), and secure with a screw. Repeat the process for the other three attachment holders. Push the four castors into the attachment holders (below right), be careful not to apply too much pressure.
Need help?
Do you have a question about the 1400/20 and is the answer not in the manual?
Questions and answers