Malone MPG318 Installation Instructions Manual

(MPG318 - MPG331 - MPG332 - MPG334 -MPG338 ) (MPG318 - MPG331 - MPG332 - MPG334 -MPG338 )
A
Frame Leg (2) Top Upright (2)
Warnings / Limitations: Do not exceed the published load bearing weight of the product.
Use on a flat dry surface. Under no circumstances will the manufacturer be responsible for
damages or failures that occur as a result of improper assembly or usage.

Installation Instructions - Please Read Before Beginning

1
. Identify and pre-stage the following parts for
building a lower side assembly.
See image 2.
3
J
I I
MALONE
FS Rack Storage System FS Rack Storage System
B C
Lower Upright (2)
J = 50mm Bolts
I = 45mm Bolts
I I
D
Upright Brace (4) Cross Support (5)

Step 1: Vehicle Installation

. Open the carton, remove the contents and confirm
that all the components of the rack have been
included. See image 1.
2
E
E
G
. Align Lower Upright (C), Frame Leg (A) and Upright
Brace (D) mounting holes. Install and firmly tighten
50mm
45mm Bolts (I) and the 50mm Bolts (J). Install and
fully insert Levelers (G). See image 3.
. Repeat Steps 2 and 3 to assemble the second lower
side assembly.
NOTE: If optional Casters or Leg Extensions are to
be installed, see instructions included with product.
R
E
Leveler (6)
F
Assembly Hardware
Coupling (2)
See Image 3
A
for Bolt
Installation
G
D
D
55mm
REV 11/15
REV 12/15
G
H
I
(16)
Bolt, 45mm 50mm
J
(2)
Bolt, 50mm 55mm
C