Table of Contents
Advertisement
3. Aim your device at the TV and tap
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
4. If the TV turned on, tap Yes, this code works.
– or –
If the TV did not turn on after tapping
waiting 10 seconds, tap No, test next code or
Send this code again.
5. From the Select your channel source screen, select the
entry that corresponds to your current channel control
method:
• Set-top Box: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote but
rather through the receiver/box.
• My xxx TV: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box's remote.
135
Power to
Power and
By accessing this document, the recipient agrees and
acknowledges that all contents and information in this document (i) are confidential and proprietary information
of Samsung, (ii) shall be subject to the non-disclosure regarding project H and Project B, and (iii) shall not be
disclosed by the recipient to any third party. Samsung Proprietary and Confidential
Note: Try matching your current channel selection method.
6. Select the Satellite Box Brand from the available list.
For example, DirectTV
• If your brand does not display in the list, tap Show other
brands and follow the on-screen instructions.
Important! You must configure your set top box for IR
communication with your device. If you do not
select More Info.. below and follow the on-screen
instructions you may not be able to properly use
the application.
7. When prompted to Enable IR, tap More Info to learn
how to configure your set top box to receive and
respond to IR controls.
8. Only after completing the IR setup process and
programming your box, press
Note: This IR programming of your set top box is a one-time
process and once successful should not need repeating.
®
.
(Back).
Advertisement
Table of Contents
