Kahn ATOM User Handbook Manual

Kahn ATOM User Handbook Manual

Climate control

Advertisement

Quick Links

Kahn Climate Control
ATOM
Kahn Climate Control
user handbook
ATOM
user handbook
Thank's for choosing Kahn. Please read this user handbook carefully prior to
installing and keep it for further reference.
Incorrect use may cause fire, electric shock and the unit falling may result in
injury or leakage. Contact our designated Kahn service centre on 0333 222 4016
specialists. The manufacturer shall not assume responsibility for accidents or injury
caused by incorrect use.
This product must not be disposed together with the domestic waste.
This product has to be disposed at an authorised place for recycling
of electrical and electronic appliances.
www.kahnclimatecontrol.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATOM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kahn ATOM

  • Page 1 Incorrect use may cause fire, electric shock and the unit falling may result in injury or leakage. Contact our designated Kahn service centre on 0333 222 4016 specialists. The manufacturer shall not assume responsibility for accidents or injury caused by incorrect use.
  • Page 2: Indoor Unit

    Installation - ATOM Please refer to our youtube channel which offers video advice and guidance for installation. Find us on ... search for Kahn Climate Control or use the QR code Cover connecting pipe with insulation lagging. Indoor Unit Sponge insulation lagging with a thickness of 8mm.
  • Page 3: Installation Instructions

    Installation Instructions Location of indoor unit Keep the air inlet and outlet free from any obstructions. Keep the height distance between the indoor and outdoor unit within 5m. If mounted on a wall or suspended from the ceiling ensure they are sturdy enough to bear the weight. Keep at least 1m away from any electrical appliances.
  • Page 4 Please refer to the wiring diagram located on the reverse of the cover plate of wiring terminals inside the evaporation unit. On the outdoor unit, the wiring diagram is fixed to the inside of cover plate (which protects the wiring terminal block to the right side of the condenser) Electrical wiring connections - Hard wire controller Wired remote controller cable Wired remote...
  • Page 5: Installation Of The Outdoor Unit

    Installation of the Outdoor Unit Air inlet Connecting pipe Drain hose Air outlet Drain opening Electrical Wiring Outdoor unit wiring terminal Connections Interconnecting cale between indoor and outdoor units Outdoor unit Indoor unit Earth Brown Blue Black Earth (Yellow/Green) Earth Live (Yellow/Green) (Brown)
  • Page 6: Liquid Pipe

    Installation of the drain hose NOTE: The drain hose must be arranged beneath the refrigerant pipe. The drain hose must not be hunched or twisted. The refrigerant pipe and the drain hose must be wrapped up by felt strip. Insulation lagging should be used at where the pipe contacts the wall. Gas pipe Liquid pipe Drain hose...
  • Page 7 Kyoto protocol, with a Global Warming Potential (GWP) = 1900(R410A)/1600(R407C)/1700(R22) PUMP DOWN PROCEDURE / REFRIGERANT RECOVERY PROCEDURE: Please refer to our youtube channel which offers video advice and guidance for maintenance. Find us on ... search for Kahn Climate Control or use the QR code www.kahnclimatecontrol.co.uk...
  • Page 8 0333 222 4016...

Table of Contents