Advertisement
Front Panel
The Status LED, Volume adjustments, and BGM adjustments are located on the
front panel.
Status LED – Lights to indicate the current operation status of the unit.
Volume Adjustments – Used to control the Volume locally, if permitted to do
so by your dealer. Also used in Connect On Demand situations (see
page 10).
BGM Adjustment – Used to control the BGM Volume locally, if permitted to
do so by your dealer.
TELink 1250i
SYSTEM OVERVIEW
Figure 1 - Front Panel Diagram
6
8/17/2004
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for TELink 1250i
- Page 1 Volume Adjustments – Used to control the Volume locally, if permitted to do so by your dealer. Also used in Connect On Demand situations (see page 10). BGM Adjustment – Used to control the BGM Volume locally, if permitted to do so by your dealer. TELink 1250i 8/17/2004...
- Page 2 Power Supply, Ethernet jack, and the external audio system that ® receives the TELink 1250i 's output. Also located here are the Impedance Switch and the Power Switch. Figure 2 - Side Panel Diagram Ethernet Jack – Used to connect to your Local Area Network (LAN).
- Page 3 Step 1 – Connections ® Locate the TELink 1250i within 6 feet of an 110VAC outlet. The unit is designed to be placed on a flat, level surface or securely mounted on a wall. Be sure to leave clearance for connections and adjustments.
- Page 4 1. Turn the power switch OFF. Plug the included power supply into a normal ® 110VAC wall outlet, and the opposite end into the TELink 1250i. Only use the power pack provided with the unit (12VDC, center pin positive). Many power supplies look alike, but provide different output.
- Page 5 Continuous Play ® The TELink 1250i plays back all dealer-loaded music and messages over your sound system or MOH port continuously. The unit automatically checks your dealer’s server(s) on a routine basis for new music and messages as they become available.
- Page 6 ® Consider the weight of the TELink 1250i when choosing a mounting wall. Make sure the wall’s construction is sufficiently strong to support the weight of the unit securely. Make sure both screws are driven into sturdy supports.
- Page 7 Step 5b - Select the Configuator Utility from the pop-up menu. ® Step 5c - The utility will automatically search the network and find the TELink 1250i. Step 5d - You can now assign it an available static IP address.
Need help?
Do you have a question about the 1250i and is the answer not in the manual?
Questions and answers