Table of Contents TE-DVR-15 picture and function ....................2 Accessories ………................... 2 Beginning to use the car DVR Charge the battery ..................3 TF card ……………..............3 Power on / off DVR .…………………............4 Basic operations Switching mode ...
I Beginning to use the car DVR Charging the battery There are two ways to charge the battery, 1. By connecting with PC: USB data wire connects it with PC. 2. By connecting with vehicle 12v power source: connect the vehicle charger with the product.
Powering on / off the DVR 1. Manually turning on / off the device: A long press of the POWER button and the startup logo will be shown on the display. Another long press on the Power button will turn off the device. The press duration required is approximately 3 seconds. 2.Automatic operation If the device is connected to a switched power outlet, when the car is started, the device starts video recorder mode automatically after a delay...
Recording mode When the car engine starts, the device will start recording automatically and the blue light will flash during this time. When the engine stops, it will save the video and shut off. The video segment will be saved on the TF card, when the card is full, it will overwrite the previous videos.
Technical Specifications Screen 1.5inch Lens GC1024 View angle 120 degree Minimum 1Lux illumination Video mode Loop recording/Motion detection Video format Recording M-JPEG video Recording 1920x1080P(24fps)1440x1080/1280×720/848x480/640×480 resolution /320×2 40(30fps) Picture 4032×3024, 3648×2736, 3264×2448, 2592×1944, 2048×1536, 1920×1080, 1280×960, 640×480 Seamless recording Auto-record Support G-sensor Manual lock...
Page 8
IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.