Table of Contents
Advertisement
Push Button
Ergonomic push button for the user for ON / FORCED SHUTDOWN / OFF, SLEEP, WAKE-UP,
RESET via Software
Key Features:
Single Push Button ON / FORCED SHUTDOWN / OFF, SLEEP, WAKE-UP, RESET via
Software
Hardware Key Behavior (push button ON/OFF/RESET)
Device is OFF: press push button -> device gets switched ON
Device is ON: press push button -> SW functionality: device shows dialog on the
screen to the user with the option: device goes to SLEEP, OFF, RESET
Device is in SLEEP mode: press push button -> device WAKES up and is in ON
mode
Device FORCED SHUTDOWN: press push button >8sec -> device is performing
a hardware shutdown. Pressing again will start the device again.
Hardware Requirements:
accordingly to Key Features
Power Supply
Dasher is powered by an external desktop power adapter with single voltage support (24V DC).
This power adapter will allow to use Dasher with all features at the same time (maximum power
consumption of Dasher). Dasher has his internal power supply to create all required voltages
with enough power for all sub-components with their maximum power consumption at the same
time.
Key Features:
External Power Adapter
Input Voltage: 100-240V AC
Output Voltage: 24V DC
Internal Power Supply
create all required voltages for Dasher parts and components to allow working
with their maximum power consumption at the same time
required power support for external devices as specified in this Intended
Hardware Usage document.
Power saving in Hardware where possible to minimize power consumption
Power Saving mode: Sleep
reduce power consumption to the minimum
confidential - © NumberFour AG
14 of 19
Advertisement
Table of Contents
