Do you have a question about the WalkTop and is the answer not in the manual?
Questions and answers
Summary of Contents for FITNEFF WalkTop
Page 1
Please read this owner’s manual thoroughly before operating and keep it handy for reference at all times. Information in this manual is subject to change without notice. Visit www.walktop.com for the latest updates to the Owner's Manual. Customer Service Line: 1-888-632-3220 Email: shop@fitneff.com...
Keep children under the age of 12 and pets away from treadmills and the WalkTop™. The WalkTop™ is made for a single user. Do not allow more than one person on the treadmill unit at a time.
Wear appropriate clothing when using your treadmill. Athletic shoes are recommended. Avoid footwear with heels. Do not place hot items, liquid or solid, on your WalkTop™. Do not use sharp tools of any kind while using your WalkTop™. Clear all items from the WalkTop™ before attempting to move, dismantle, or make adjustments.
CAUTION: Do not depress the red adjustment lever until the installation process is com- plete. To avoid accidental opening of the WalkTop™, leave the storage strap secured until the installation is complete.
Page 5
STEP TWO Loosen thumbscrews (counterclockwise) on the underside of the unit and position attachment brackets to approximate width of treadmill handrails. Lightly retighten thumbscrews (clockwise) to avoid accidental movement of the attachment brackets during the installation process. STEP THREE Turn tabletop up with the arrow facing the treadmill control panel and place unit horizontally across treadmill handrails.
Page 6
Loosen thumbscrews (counterclockwise) and push each of the four attachment brackets tightly against the inside of the treadmill handrails. Wrap four adjustment straps around treadmill handrails. If treadmill has angled arms, obtain help to hold WalkTop™ in place while adjustment straps are being secured. STEP FIVE Tighten adjustment straps firmly into place.
Page 7
Tighten thumbscrews (clockwise) on underside of unit. Remove the security strap to complete the installation. YOUR WALKTOP™ IS NOW INSTALLED! IMPORTANT After initial setup, remove protective film from tabletop once the WalkTop™ is secured to the treadmill. Reapply storage strap when removing unit. ...
OPERATION & ADJUSTMENTS WARNING: Remove all objects from tabletop prior to making any adjustments. Never ad- just the unit while the treadmill is moving. Keep fingers clear of hinge mechanisms. STEP ONE: SET HEIGHT Press the red adjustment lever to adjust the back of the unit to the height of your elbows when they are bent at 90 ...
Page 9
STEP TWO: LEVEL TABLETOP Place hands under the front corner of each side of the tabletop. Slowly lift in unison to one of the seven (7) predetermined locations. Positions can only be selected when starting from the lowered position. If you move past the desired ratchet setting, see STEP THREE.
Page 10
STEP THREE: RESETTING RATCHET To reset ratchet, lift tabletop all the way to top and then lower to bottom. IMPORTANT Return the WalkTop™ to the fully closed position prior to removing from the treadmill.
Need help?
Do you have a question about the WalkTop and is the answer not in the manual?
Questions and answers