Bragi B1000 Quick Start Manual

Before you get started

How to charge

Activate the Dash

The Dash & Charger
To activate The Dash connect The
Charger including The Dash to your
computer via the USB Cable.
The Dash is activated when the
LightGuide flashes blue. You may
now safely eject and disconnect
at any time.
Download the Bragi App on
bragi.com
Register your Dash through the
bragi app to get full support.

Bragi App

Download it
Customize
Download the free Bragi App now
to personalize and set up your Dash
bragi.com/app To charge the battery, connect The Charger to
your Computer or another power source via USB
The Charger fully charges The Dash up to 5 times
while on-the-go.
Download from
Windows Phone Store

How to check the battery

The Dash & Charger
Place The Dash in The
Charger and make sure
it sits on the MagSnap.
full
Shake The Dash
high
And you will see the current
battery status of your Dash.
medium
low
BRAGI
Check out the LED on the side of The Charger to see the
current battery status. The Dash needs to be placed in
The Charger or The Charger needs to be connected to a
power source.

How to insert

The Dash

Take The Right Dash, tilt it slightly forward and
insert the speaker tip into your ear canal.
Adjust to a PerfectFit by rotating The Dash back-
wards until it feels comfortable and secure in your
ear.
high
medium
low

How to wear

How to change

The PerfectFit

The FitSleeves

The Dash is already fitted with XS
FitSleeves. Try different sizes to
find your PerfectFit.
The PerfectFit is important to ma-
ximise performance of The Dash
and accuracy the DataHub.
With The PerfectFit you should feel The Dash M
completely closing off your ear canal while it sits
snugly in your ear.
Achieving The PerfectFit may require some adjust-
ment. To adjust you can use one hand to lift up in
your ear and adjust with the other. By doing this
you should be able to press the upper part of The
Dash into a locked position as shown in the dia-
gram above.
L
S
XS