Obtura III MAX Operator's Manual

Heated gutta percha system

Hide thumbs

Table Of Contents

Welcome

to the

2260 Wendt Street, Algonquin, IL 60102

(800) 344-1321 • www.obtura.com

OPERATOR'S

MANUAL

57412G - 10/17/16

Your essential guide to our clinically-advanced

Heated Gutta Percha System

Table of Contents

Need help?

Do you have a question about the III MAX and is the answer not in the manual?

Questions and answers

Summary of Contents for Obtura III MAX

Page 1 Welcome to the 2260 Wendt Street, Algonquin, IL 60102 (800) 344-1321 • www.obtura.com OPERATOR’S MANUAL © 2011 Obtura Spartan® 57412G - 10/17/16 Your essential guide to our clinically-advanced Heated Gutta Percha System...
Page 2 SYSTEM Heated Gutta Percha System The Obtura III MAX is intended to be used by professionally-qualiﬁed dentists, endodontists and dental clinicians for specialty procedures in root canal and restorative dentistry. This equipment conforms to the requirements of the Medical Devices Directive 93/42/EEC and satisﬁes the electrical safety requirements of EN 60601-1 and electromagnetic emissions and immunity standards of EN 60601-1-2.
Page 3 The Obtura III Max Heated Gutta Percha System is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Obtura III Max Heated Gutta Percha System 2. Insert the power supply connector into the power supply port. Then plug the power supply into the appropriate can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF ----electrical outlet.
Page 4: Table Of Contents
The Obtura III Max Heated Gutta Percha System is intended for use in the electromagnetic environment specified Warranty.................................1 below. The customer or the user of the Obtura III Max Heated Gutta Percha System should assure that it is used in such an environment.
Page 5: Warranty
The Obtura III Max Heated Gutta Percha System is intended for use in the electromagnetic environment specified below. The customer or the user of the Obtura III Max Heated Gutta Percha System should assure that it is used in The Obtura III MAX is warranted against defects in materials and workmanship for two (2) years from date of such an environment.
Page 6: Overview
After attaching the needle and thermal protector, turn the Obtura III MAX on and set it to operating temperature. below. The customer or the user of the Obtura III Max Heated Gutta Percha System should assure that it is used in It takes the unit approximately 120 seconds to reach the highest operating temperature of 200°C.
Page 7: Unpacking And Assembling
Use only with adequate ventilation. Avoid breathing vapors or spray mists. of the unit, invert the Obtura III MAX on a smooth, soft surface and gently press the cable into the tracks provided, Storage: Keep container in a cool, well-ventilated area. Avoid all sources of ignition (spark or ﬂame). Store below 120 °F .
Page 8: Operation
Fire There are four (4) tactile switches on the front of the Obtura III MAX and an LCD display. The functions of the Health four switches are: Power On/Off , Temperature Up, Temperature Down and Temperature Memory (as shown in the “Quick Start Guide”...
Page 9: Installing A Needle
Description Power on the Obtura III MAX and wait for the heater to come up to your desired temperature. Press the handpiece release button on the top of the Obtura III MAX handpiece and withdraw the plunger shaft. Insert a gutta percha stick into the...
Page 10: Sterilization Instructions
Q. Can I use the Obtura III MAX if the display is showing an Error Code? A. No, your Obtura III MAX unit should be evaluated and repaired if it is displaying an error code on the screen (see page 9).
Page 11: Maintenance
Theory of Operation NOTE: A) For optimal cleaning, use a Birex®-type solution to aid in disinfecting and deodorizing your Obtura III MAX unit. B) Never spray the disinfectant solution directly on to the unit; always spray into a disposable cloth, then wipe down.
Page 12 3. Use the Multi-Tool to unscrew the needle nut from the heater thread. Set aside the needle nut. Dispose of the needle slipping occurs during testing. The plunger shaft of the Obtura III MAX should be checked for bending; if it will not roll ---(for optimum performance, Obtura applicator needles should be used only once).