Summary of Contents for SWIT M-1072A
-
Page 1: User Manual
M-1072A Model: Rack Mount Broadcast Audio Loudness Monitor User Manual Ver：V1.0.0V00 Please read this User Manual throughout before using. - Page 2 Reproduction in whole or in part without written permission is prohibited. ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners. Due to constant effort of product development, SWIT reserves the right to make changes and ．...
-
Page 3: Maintenance
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. - Page 4 1. Features High resolution 7-inch LCD Panel when signal is connected and user defined ◆ ◆ ◆ ◆ 16:9, 1024×600 FFS LCD panels, with 900:1 time period, and display the average contrast, H/V 160° wide viewing angle, and loudness values. 19-inch 3U rack mount Audio Lissajous pattern display ◆...
- Page 5 2. Panel Instruction Front view Speaker M onitor HDMI and SDI audio (speaker will automatically mute when 6.35mm outputs ⑴ ： ： ： ： MENU P ress to enter Menu system ⑵ ： ： ： ： ⑶ SOURCE: Input signal selection Press “SOURCE”...
-
Page 6: Rear View
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter. (Pin 1: Negative, Pin 4: Positive) SDI-LOOP1: HD/SD-SDI loop through output from SDI-IN1 (BNC connector) ⑵ SDI-LOOP2: HD/SD-SDI loop through output from SDI-IN2 (BNC connector) ⑶ HDMI-IN: HDMI input (HDMI-A) ⑷... - Page 7 3. Graphical Interface Description M-1072A supports real-time VU/PPM, real-time loudness meter, Loudness histogram statistics, Loudness waveform track and Lissajous phase figure display. 1. Real-time VU/PPM and loudness meters 3. Loudness waveform track ： ： ： ： ： ： ： ：...
- Page 8 4. Menu Operation Press “MENU” and it will display menu system ⑴ ⑵ Revolve “ENTER” to select an item. The selected item will be highlighted displayed. ⑶ Press “ENTER” to enter the selected item. Under menu system, press “MENU” to back to previous menu. ⑷...
-
Page 9: Display Submenu
4.4 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen. Revolve "ENTER" to turn on/off the items: INFO: Including Input format, aspect ratio, ⑴ underscan/overscan, zoom status MARKER: The 4:3 scale mark on 16:9 image. ⑵... -
Page 10: Specifications
6. Specifications LCD Performance Size 7.0 inches Display area 153.6×90mm Resolution 1024×RGB×600 Aspect ratio 16:9/4:3 Brightness 400cd Contrast 900:1 Color depth 16.77 million colors Viewing angle Horizontal: 160 V ertical: 160 ° ° Input / Output BNC ×2 HD/SD-SDI input ×2 Input HDMI ×1 HDMI input ×1... -
Page 11: Packing List
7. Packing List 1. Monitor × 2. User Manual × 3. Power adaptor × 4. Power cable × 5. LCD protection film ×...
Need help?
Do you have a question about the M-1072A and is the answer not in the manual?
Questions and answers