Summary of Contents for Ecumaster DL1
- Page 1 ECUMASTER DL1 Logger and Bluetooth transciver User manual Preliminary version WWW.ECUMASTER.COM Technical support Phone: +48 12 3565336 Email : tech@ecumaster.com...
- Page 2 SDHC card 4GB or bigger should be used (logging time is about 11 hour per 1GB). Logger installation DL1 device required power in range 5-20V and connection to serial outputs of EMU or EMU BLACK. Important: Shielded cable should be used for RXD and TXD signals.
- Page 3 Logger LED Diagnosis Red LED flashing fast – boot loader mode Red LED double flash - SDHC card error Orange LED on – no SDHC card inserted Blue LED on – date and time set Green LED on – SDHC card inside, device ready to work Green LED flashing fast –...
- Page 4 Time and date set up DL1 device has built in real time clock and backup battery to keep time and date when the main power is off. To setup new time and date, device needs to be connected to EMU / EMU BLACK and powered.