Summary of Contents for X10 LC4
- Page 1 User Guide LC4 Before using this product, please read the guide carefully to avoid any damage to the product.
-
Page 2: Product Description
1. Product Description 1.1 Packing list IP Camera User Manual Before using this product, please read the guide carefully to avoid any damages to the product, do not misconfiguration or misuse. USB cable User manual Camera Adapter *User manual is a download 1.2 Product outlook RESET Infrared night... - Page 3 For Android phone users: Open the Google Play Store and search for “X10 Linked” Download and install the Linked app onto your Android phone. 2.2 Device Hardware installation Connect the power supply to the camera device, then wait for the indicator light to flash.
- Page 4 b. Your login information will be saved the next time you open the app; However, it is recommended that you write your login information down. c. On Android devices, you will be required to verify your registration by sending a special code to your email address. After you hit "send code"...
-
Page 5: Live Video
3. App functions 3.1 Live video After syncing successfully, click the IP Camera interface to view live video. Smooth, SD and HD video definition are available. 3.2 Video Recording 3.2.1 Users can record video on live video interface or on playback video interface, by pressing the red video recording icon on the left. - Page 6 3.2.2 Playback: Click “Playback” icon and choose the time to replay the video recorded by the camera. Select the date and time you wish to playback. You can fast forward or backward by swiping on the time bar. Tap on the camera icon to take a screen shot while replaying the video.
- Page 7 5．FAQ 1) Cannot bind camera device? ☆ User can only bind when the camera device is in the Binding mode (i.e. LED is blue and flashes once a second). Otherwise, you cannot bind a camera device when outside of the Binding mode. ☆...
- Page 8 7) Sound is not coming from app on phone? Please make sure your phone is not on silent and the volume is turned up. OTHER NOTES: ● To refresh your camera list, pull-down on the screen while viewing the camera list. ●...
Need help?
Do you have a question about the LC4 and is the answer not in the manual?
Questions and answers
Model LC4/LC4b and have new Nighthawk wi-fi cable moden-router.. my app has newer camera so how do i connect again to my wi-fi
To connect the X10 LC4 camera to a new Nighthawk Wi-Fi cable modem-router, follow these steps:
1. Power on the Camera: Connect the power supply to the camera and wait for the LED light to flash blue, indicating it is in syncing mode.
2. Install the App: Download and install the "X10 Linked" app from the App Store (iPhone) or Google Play Store (Android).
3. Open the App: Launch the app and follow the setup process.
4. Connect to Wi-Fi:
a. Find your Nighthawk Wi-Fi network in the app’s setup screen.
b. Enter your Wi-Fi password. If your network has no password, select the "No Wi-Fi password" option.
c. Click "Next."
5. Sound Wave Setup: Follow the on-screen instructions to move your phone's speaker close to the camera’s microphone. Ensure you are in a quiet environment.
6. Send Sound Wave: Tap "Send Sound Wave" on the app. You will hear a scrambled sound from your phone. Keep your phone still until the transmission completes.
7. Confirmation: The app will confirm a successful connection and redirect you to the camera view interface.
8. Troubleshooting: If the connection fails after 2 minutes, retry from Step 4, ensuring correct Wi-Fi credentials and a quiet setup environment.
Your X10 LC4 camera should now be connected to your Nighthawk router.
This answer is automatically generated