Picture Settings - Element ELST3216H Instruction Manual

CUSTOMIZING TV SETTINGS

Picture Settings

Press MENU to display the main interface, then
use the Arrow buttons to highlight TV Settings
and press OK to
to cycle among different options and select
Picture to enter and adjust each option setting.
Cycle among picture modes:
Dynamic/Standard/Movie/User.
PICTURE MODE Alternative: Press P.MODE button on
remote control to set the picture mode
directly.
Allow the blue background to turn
BLUE SCREEN On/Off during weak or no signal
conditions.
Increase or decrease the amount of
BRIGHTNESS
white in the picture.
Adjust the difference between light
CONTRAST
and dark levels in the pictures.
COLOR Control the color intensity.
Adjust crispness level in edges
SHARPNESS between light and dark areas of the
picture.
Adjust the balance between red and
TINT
green levels.
COLOR Cycle among color temperatures:
TEMPERATURE Normal/Warm/Cool.
Set the following options:
Noise Reduction: Reduce the noise
level of the connected device: Off/
Weak/Middle/Strong.
White Balance: To set the different
options of white balance.
ADVANCED
Color Management: set different color
OPTION
options
Backlight: To set the value of
backlight.
Gamma: To set Gamma value:
2.0/2.2/2.4.
Reset: To reset the advanced option.
Use the Arrow buttons
17