Advertisement
Quick Links
Advertisement
Summary of Contents for Tantalus Systems Corp TSC
- Page 1 Tantalus Systems Corp. TSC Security System Keypad Quick Access User Manual...
- Page 2 Quick Access User Manual 1. Introduction Congratulations on purchasing the Tantalus TSC Security System – This system is so simple you shouldn’t need a user manual. 2. Using the Keypad The keys on the user keypad have functionality as described below.
- Page 3 an alarm if a protected door or window is opened. At the end of the exit delay the Red light stays on. 4. Disarming The System The system can be disarmed as described below. When entering through a Entry door, the keypad will beep and the entry delay will begin, reminding you to disarm the system.
- Page 4 Enter Code To Arm Open zones are displayed first Bypass? Press the Yes/No key to bypass the displayed zone. “Zone Name” After selection the next zone is displayed. Bypass? “O” will appear if a zone is open and not bypassed. “Zone Name”...
- Page 5 Sensors? Contact installer to replace Keypad and Controller. “Zone Name” The Keypad will display the first component that may be replaced Replace? Press the No key to select the next component or press the Yes key to replace this component . Remove Component The keypad will wait two minutes for you to And Press Yes remove component and press the Yes key.
- Page 6 Loss of Clock Press Menu to adjust time or Bypass to clear message. “Device Name” AC Make sure the device is plugged in or contact installer.
Need help?
Do you have a question about the TSC and is the answer not in the manual?
Questions and answers