Table of Contents
Advertisement
4. Scroll to a ringtone and press the
Confirm key.
For an individual contact, your device will
use the ringtone that was assigned last to
the contact card. For example, if you
assign a ringtone to a group and then
assign another ringtone to a contact card
within that group, the device will use the
ringtone assigned to the contact card
when that contact calls.
Create a contact group
You can create groups of contacts and
send messages to the entire group.
1. In Standby mode, press the Menu key →
Contacts.
2. Scroll right to switch to the group list.
3. Press <Options> → New group.
4. Enter a name and press <OK>.
5. Scroll to your new group and press the
Confirm key to open it.
6. Press <Options> → Add members.
7. Scroll to each contact you want to add
and press the Confirm key.
8. When you are finished selecting
contacts, press <OK> to save them to
the group.
9. Press <Yes> (if necessary).
Synchronise your contacts
To synchronise your contacts by using the
current sync profile,
1. In Standby mode, press the Menu key →
Contacts.
2. Scroll to a contact and press <Options>
→ Synchronisation → Start.
3. Scroll to a sync profile or device and
press the Confirm key.
To change sync profiles or settings, see
"Synchronise your device."
p. 61
49
Advertisement
Table of Contents
