XENO XPSU1208e Manual

Norbain SD
210 Wharfdale Rd,
Winnersh Triangle,
Wokingham, Berkshire,
RG41 5TP, UK.
12V dc 4A/8A Low
Profile CCTV SMPSU
Thank you for choosing this high quality 12V dc power supply. Before attempting to
connect or operate this product please make sure you carefully read these
instructions for your safety.
General:
A range of 12V dc power supplies capable of delivering fully rated current to load, housed within
a low profile metal enclosure, suitable for internal use only. Provided with 8 or 16 individually
PTC fused outputs ideal for low powered CCTV installations.
I
NSTALLATION AND
This unit is only suitable for installation as permanently connected equipment and MUST be fed from a
mains power source having a separate (approved) disconnect device - fitted with a fuse or other over-
current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate
earth fault protection to the applicable standard.
The enclosure is NOT SUITABLE for external use; bushings should meet a minimum flammability specification
of UL94 HB.
The PSU should be installed according to all relevant safety regulations.
1) Fix to wall or other support structure using the screws/fixings supplied or use appropriate types for the
surface it is being mounted to.
2) Mains input cable must be to the applicable standard with a 3A or greater current capacity, having a
minimum operating voltage of 300/500V ac.
3) The low voltage output cable must be correctly sized to carry the rated load current to the devices
connected to the PSU.
4) Mains input and low voltage output cables should be routed to use different entry/exit holes in the
enclosure.
5) To comply with current BS EN60950 safety legislation the supplied cable ties must be used to secure
mains input and low voltage output wiring.
Ref: XPSU1208e / XPSU1216e
XPSU1208e
4A: 8 x 0.5A Fused Outputs
S -U
ET P
Tel: +44 (0)118 912 5000
Fax: +44 (0)118 912 5001
Web:
www.vista-cctv.com
XPSU1216e
8A: 16 x 0.5A Fused Outputs
1