Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Range AT 900
- Page 1 DISHWASHERS RANGE AT 900 INSTALLATION, USE AND MAINTENANCE...
- Page 2 WARNINGS The appliance is to be used for washing dishes, glasses, cutlery, and trays in the kitchen. x Read the instructions carefully before installation, use and maintenance of the appliance. x The installation has to be performed by qualified personnel following the manufacturer's instructions given in the provided manual.
- Page 3 x 230 V (3a) 50 Hz x 230 V (1a) 50Hz The manufacturer's arrangement matches the first specification (that is: 400V, 3-phases, with neutral); the others can be achieved following the provided wiring diagram. The electric connection has to be made by interposing a general switch on the wall with fuses having a capacity no lower than 25 A.
-
Page 4: Washing Cycle
WATER FILLING AND HEATING Picture 1 A Main switch B Lamp “machine on” C Lamp “machine ready” D Lamp “cycle on” E Boiler thermometer With reference to picture 1, the appliance is switched on by turning the main switch (A) clockwise into position (1);... - Page 5 dispenser. Between the washing and the rinsing cycle the appliance makes a dripping pause. When the cycle is finished, the lamp (D) turns off. x On demand, it is available a device called “THERMOLOCK”, which lengthens the washing cycle until when the water in the boiler achieves the pre-set right temperature. x In order to start the following cycle, repeat all the operations, considering that the detergent has to be added every 3 –...
-
Page 6: Periodic Maintenance
x Remove the filters and clean them carefully. As for the models with built-in drain pump, clean the drain pump filter by unscrewing its tap from the frontal lower base of the appliance. STAINLESS STEEL PARTS CLEANING Clean all the stainless steel parts accurately by using soaped water or common degreasing products. Do not use abrasive powders or iron wool.
Need help?
Do you have a question about the AT 900 and is the answer not in the manual?
Questions and answers