Advertisement
Table of Contents
Monique
The finest bass preamplifier in the world
Monique gives you the tone and playing characteristics of the greatest all tube bass amps in a
package that won't break your back. Whether it is through the recording console, the house
PA or any other power amplifier, Monique is going to give you sound and playing
characteristics you will adore.
She is an absolute tone monster.
Step 1. First, plug an IEC AC power cable into the receptacle on the back of Monique.
Monique comes to you ready for the AC power in your country, no matter where you live.
Cable up your bass and plug it into the input on the right front of Monique.
Step 2. To turn her up for the first time,
connect any amplifier with a speaker to
Monique.
Connect the "Line Out" of Monique to the "Input" of your Amplifier. "Line Out" is on the back of
Monique. Any good 1/4" instrument cable will work for this. Before you turn your amplifier on,
make sure the Line Level of Monique is all the way off.
Alternatively,
Monique can be connected directly to the "Amp Input" of any amplifier out there.
Sometimes this is labeled "Power Amp In." Doing this bypasses the EQ stages of the
Amplifier and can deliver a more precise (less muddy) playing experience. You can also
connect Monique directly to the Effects Return of many amplifiers.
Step 3. To start out, It is a good idea to "zero out" the Baxandall EQ by putting all three knobs
straight up at noon. When these three knobs are straight up, you are running the EQ
completely flat.
Step 4. Now, with Monique connected to the Input of your amplifier, you can turn your
amplifier ON. Give the amplifier a bit of volume.
Step 5. Turn up the volume on your bass and then slowly turn up Monique's Line Out Knob
(CW) until you can hear yourself playing.
That's it for all the instructions you really have to know. From here on out it is all a matter of
what you want to create with this tone monster.
Jule Amps
343 Soquel Avenue #304, Santa Cruz CA USA 95062
www.juleamps.com
661 428 9394
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Jule Amps monique
- Page 1 Monique. Connect the “Line Out” of Monique to the “Input” of your Amplifier. “Line Out” is on the back of Monique. Any good 1/4” instrument cable will work for this. Before you turn your amplifier on, make sure the Line Level of Monique is all the way off.
- Page 2 (among other things). Some of our customers describe it as control over the “feel” of your bass. The Sensitivity control has a lot to do with the playing characteristics of Monique, as well as the match-up to your bass whether it has active or a passive pickups.
- Page 3 Line Out knob pushed in. See below). Monique has a built in option to increase the the Line Out level from the original maximum output level of 0db (.775 volts) to more than +4db (1.44 volts). To add the additional 4db to both the Line Output and the Balanced XLR Output just pull out the Line Out knob.
- Page 4 With this in mind, start out with both the Line Out Level and the Balanced Out Level on Monique turned to zero (CCW). Then turn up to dial in your sweet spot.
- Page 5 Jule Amps 343 Soquel Avenue #304, Santa Cruz CA USA 95062 www.juleamps.com 661 428 9394...
Need help?
Do you have a question about the monique and is the answer not in the manual?
Questions and answers