Subscribe to Our Youtube Channel
Related Manuals for ffuuss handryer2
Summary of Contents for ffuuss handryer2
- Page 1 USER MANUAL This USER MANUAL includes the necessary instructions for installing the ffuuss handryer2 and the warranty documents. Read and keep these instructions.
-
Page 2: Technical Specifications
This unit complies with the following directives/normatives: 1999/5/CE 2004/108/CE 2006/95/CE 2002/96/CE 2011/65/CE Others This unit has technology Standard warranty 5 years for parts and 1 year for labour (see conditions) NOTE: ffuuss reserves the right to make changes without prior notice. www.ffuuss.com... -
Page 3: On The Wall
instructions. -
Page 4: General Notes
Check the air intake through the base of the ffuuss Contact your authorised handryer2 regularly and make sure that it is free from Air comes out of the front or the rear of the Check there is nothing obstructing the air... -
Page 5: Warranty
User Manual, for a period of FIVE years. WARRANTY SERVICE It covers all the labour required to ensure the correct ffuuss handryer2 serial number and have a copy of functioning of the ffuuss handryer2 at no extra cost The FIVE-year limited warranty on parts starts on the your purchase invoice. - Page 6 Place the ffuuss handryer2 template against the ⁄ ” 3 ⁄ m / 1 m / 9 3 4 2 m 2 5 0 m wall where it will be installed and make the holes according to the diagram. Check beforehand if there is ”...
- Page 7 Once the marks have been made, attach the wall bracket to the wall and prepare the cable to the electricity network. www.ffuuss.com...
- Page 8 Take the ffuuss handryer2 from its packaging and open the front cover to install the electricity cable. Open the cover of the connector box which is where the cable to the network will be installed. www.ffuuss.com...
- Page 9 Introduce the electricity cable through the hole at the rear and pull it out from the front. www.ffuuss.com...
- Page 10 Once the cable has been passed through the hole, connect each end to its respective terminal, placing each one in the right path and then close the box. www.ffuuss.com...
- Page 11 After installing the cable, screw the cover closed. www.ffuuss.com...
- Page 12 Place the ffuuss handryer2 on the wall bracket, remove the air intake filter and fix the unit via the inner hole. Insert the filter and connect the unit. www.ffuuss.com...
- Page 13 When a red light is reflected in the upper part of the front pannel, this means that the water tank is full. Empty and clean it of any posible dirt. Put the tank back. Once the tank is empty, the red light will disappear. www.ffuuss.com...
- Page 14 HEPA H13 filter. It is recommended that the filter is checked for integrity and lack of obstructions each time the unit is maintained, and changed when necessary or at least once a year. It is also advisable to clean the water pipe hole with the brush every time the ffuuss handryer2 cleaned.
- Page 15 www.ffuuss.com...
- Page 16 Air hugs technology www.ffuuss.com...
Need help?
Do you have a question about the handryer2 and is the answer not in the manual?
Questions and answers