ABB M2131xPx-A series Operating Instructions Manual page 21

Open a door
Function
Open a door
Tab.14
Reset to factory default
Function
Reset to factory default
Tab.15
Technical data of ID card
Work frequency
125KHz
Tab.16
Operating Instructions VER:1.3
Command
Swipe the enrolled keycard
Command
Press and hold the 1st button
for 3 s to enter configuration
mode.
Press and hold the 1st button
for 10 s to reset to factory
default.
Reboot the device
Standard
ISO18000-2
Operation
Indicated color of door open
Green
Indicated color of door open
3 LED: green cycle flash
3 LED: OFF
Door open LED: red, green,
orange cycle flash
Support ID card protocol
EM4100, EM4205, EM4305,
EM4450, TK4100,
T5567/T5577
│21