Table of Contents
Advertisement
Using the Windows Utility
WPS Manager Screen
WPS (Wi-Fi Protected Setup) can simplify the process of connecting any device to the wire-
less network by using the push button configuration (PBC) on the Wireless Access Point, or
entering a PIN code.
You will use the WPS screen when you try to connect the wireless network with the WPS
function.
Data - WPS Manager Screen
WPS
WPS Network List
Scan
PIN Code
Pin Method
Message
WPS-PBC
WPS-PIN
WPS-Stop
Wi-Fi Manager
About
Figure 8: WPS Manager Screen
It displays the information of surrounding APs with WPS IE from
last scan result. List information includes SSID, WPS Status,
Security, Signal Strength, Channel and MAC Address.
Click this button to update information on surrounding wireless
network.
Enter the PIN code displayed in the following field to the WPS
screen of the access point. When STA is Enrollee, you can use "*"
button to re-generate new PIN Code.
Our station role-playing as an Enrollee or an external Registrar.
Information about Security and Key in the credential.
Start to add to AP using PBC configuration method.
Start to add to Registrar using PIN configuration method. If STA
Registrar, remember that enter PIN Code read from your Enrollee
before starting PIN.
Click this to stop WPS action and disconnect this active link. The
driver will select any non-security AP.
Click this to view the Wireless Network Connection sub-screen.
Please refer to the following section for more details.
Click this to see the information of the current version.
7
Advertisement
Table of Contents
