Table of Contents
Advertisement
Qijmjqt!6:9`12`HfuujohTubsufe/gn!!Qbhf!:!!Xfeoftebz-!Tfqufncfs!24-!3117!!2;62!QN
When inserting the battery, be careful not to damage
the metallic connectors of the SIM card slot.
5YKVEJKPI QP VJG RJQPG
To switch on the phone, long press the
the PIN code if required (the 4 to 8 digit secret code
of your SIM card). It is preconfigured and provided to
you by your network operator or retailer. For more
information on PIN code, see "5GEWTKV[" on page 71.
If you enter an incorrect PIN code 3 times in succession,
your SIM card will be blocked. To unblock it, you must
obtain the PUK code from your network operator.
%JCTIKPI VJG DCVVGT[
Your phone is powered by a rechargeable battery. The
new battery is partially charged. A sound alert will be
emitted to warn you when the battery level becomes low.
We recommend that you do not remove the battery
when the phone is switched on as you may lose all your
personal settings as a result. If you do remove it, the
date and time settings are only memorized for a short
while. As such, you need to reset the information after
you have installed the battery back again.
)GVVKPI 5VCTVGF
Once the battery and battery cover are installed, you
can charge the phone. Plug in the connector as shown
below. Then plug the other end into an AC power
socket.
key. Enter
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 2.5 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time and stand-by time can go up to 10 hours* and
1000 hours* respectively.
*Depending on the network conditions, user settings,
method of use, etc the actual results may differ.
Advertisement
Table of Contents
