Table of Contents
Advertisement
3.3.
DEVICE DRIVER
3.3.1. Device Driver Installation Under Windows 95
If you want to install modem and audio device driver onto your system, please follow the
steps as described below:
1.) Start up your Microsoftâ Windowsâ 95 operating system.
2.) The "New Hardware Found" dialog box will display the message
"PCI Multimedia Audio Device". Choose the option "Driver from disk provided by
hardware manufacturer".
3.) Please, insert the installation-CD into your CD-ROM drive D or E.
4.) Assuming drive D is used, type D:\DRV in the command line and click on the OK
push button.
5.) The necessary device drivers will be installed and you will be prompted to restart
your computer.
3.3.2. Device Driver Uninstallation Under Windows
You may wish to replace your present Combo card with another type.
Before doing so go to the Windows Control Panel and select the "Add/Remove
Programs" icon. Under the "Add/Remove Programs Properties" dialog box choose the
"Install/Uninstall" tap.
Select now the "Uninstall ESS Modem" software and click on the "Add/Remove"
push button. Windowsâ 95 will enter the Setup program "ESS Maestro-2E Modem
Utility", and the first Setup dialog box will appear as shown on the following page.
ESS Audio/Modem Combo Card
Page - 6
95
Advertisement
Table of Contents
