Connecting a sky digital set top box 42-43 Wall mounting Frequently asked questions 44-45 TV buttons Technical specification 46-47 Remote control Bush warranty information Connections TV control stick and input source TV connections 23-24 Standard features How to navigate the menus Picture menu Sound menu...
Page 4
Safety information Important - Please read these instructions fully before installing or operating • Ensure this TV is used in moderate climates only. • In case of electrostatic discharge (ESD) the TV may display incorrect functions. In such case, switch the TV off and switch the TV back on.
Safety information Important - Please read these instructions fully before installing or operating • The ideal distance to watch the television is Important information regarding use of video games, approximately five times the length of the diagonal computers, captions or other fixed image displays measurements of the TV screen.
Page 6
Safety information Important - Please read these instructions fully before installing or operating Disposal UK: Waste electrical products should not be disposed of with household waste. Please dispose Manufactured under license from Dolby Laboratories. of the product at a designated collection point for Dolby, Dolby Audio, and the double-D symbol are recycling of WEEE.
Getting to know your TV You’ll be up and running in no time Accessories 1 x User guide 1 x Remote control User Guide 1 x Quick start guide 2 x AAA batteries 1 x TV 1 x R (right) 1 x L (left) 1 x Power cable Note: Please save your box/packaging as you will need this in the event of warranty/service repair or support.
Getting to know your TV You’ll be up and running in no time Stand installation To complete the stand installation you will require a cross head screw driver. The stand installation pack comes with 4 screws and 2 x stand feet. 1 x R (right) 1 x L (left) fig 1) Place the TV set on a flat and clean surface with...
Getting to know your TV You’ll be up and running in no time Detaching the stand To detach the stand please remove the 4 screws highlighted then remove the stand feet from the rear of the TV set. Securing the TV using anti-tip straps For maximum security in the home, when using a TV with its stand, anti-tip straps should be fitted.
Getting to know your TV You’ll be up and running in no time Wall mounting IMPORTANT: Before drilling any holes in the wall ensure you are not drilling where there could be any electric wires, water or gas pipes. 1) Remove the four screws located at the back of the TV set. 2) The wall mount can now be easily attached to the mounting holes, located on the back of the TV, using the same four screws removed.
Getting to know your TV You’ll be up and running in no time Choosing Mode Input/Source TV control stick and input source Use the source menu to switch between input/ connections. A) Using the buttons on the remote control: 1) Press [SOURCE] - The source menu will appear. 2) Press [ ] or [V] to select the input you require.
Getting to know your TV You’ll be up and running in no time Remote control functions For Models with Integrated DVD players For Models with PVR Function For Models with USB Playback For Models with 3D Feature 1) STANDBY 2) MUTE 3) DTV 4) RADIO 5) DVD...
Page 15
Connections Bringing it all together Connections EARPHONE Earphone socket ETHERNET/LAN Network connection OPTICAL in Digital Optical output SCART SCART input HDMI 1 HDMI input HDMI 2 HDMI input RF IN RF / TV Aerial Input HDMI 3 HDMI input USB input x 2 CI CARD IN Common Interface module VIDEO...
Page 16
Connections Bringing it all together Connections Connecting a camcorder, camera or games console. The TV source should be set to composite/AV. L (white) L (white) R (red) R (red) Video Video (yellow) (yellow) Connecting a DVD player/recorder, video recorder or cable/satellite box. Source should be set to SCART.
Page 17
Connections Connecting a High Definition (HD) Device Option 2 - via Component cable If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by phono cable (for sound). TV Source should be set to Component/YPbPr.
Standard features Standard features Simple everyday use Simple everyday use How to navigate the menus To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons.
Standard features Simple everyday use Aspect Ratio - Within the UK the picture format varies Picture menu depending on the channel/broadcast. There are a number of different options to best meet your needs. • Auto - Automatically displays the best picture format.
Standard features Simple everyday use DTS TruSurround Sound Sound menu • OFF - Off. • ON - TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog. Digital Output •...
Standard features Simple everyday use Channel menu Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and analogue channels. Analogue Manual Tuning - Allows you to manually tune your analogue signal. Freeview Manual Tuning - Allows you to manually tune your digital signal.
Standard features Simple everyday use Time menu System/Hotel lock menu Auto Sync - ON/OFF - Automatically sets date and System/Hotel Lock - Allows you to lock or unlock the time. menu. You will be asked to enter a 4 digit password use button to quit the password input.
Standard features Simple everyday use NETWORK menu - select from the following options: Settings menu IP config - Allows you to access LAN network connection settings. Choose from the following options: Auto: Will automatically connect the TV to your home network (this is the default setting and is highly recommended).
Advanced features Getting the most from your TV 7 day TV guide and channel list TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the freeview channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.
Advanced features Getting the most from your TV USB media player USB mode offers playback of various different types of content that you have saved on your USB Memory Stick. On switching to USB source the menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on file type.
Page 28
Advanced features Getting the most from your TV USB record - Freeview/Soarview mode USB record – Freeview/Saorview mode Built into this television is a USB record facility. This function is available in Freeview/Soarview mode when used in conjunction with a compatible USB memory stick or USB hard drive. The benefits of this are as follows: •...
Page 29
Advanced features Getting the most from your TV Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time shift you must press play/pause button. One Button Record At any point in time you may decide to record the current programme that you are watching. To do this you need to press the red button highlighted below.
Product support Help is always at hand Connecting a sky digital set top box Using a Sky Remote or a Universal Remote to operate your TV Sky Remote Control - If you wish to use your Sky remote to operate the basic functions of your TV, you need to program a 4 digit code into it.
Page 32
Product support Help is always at hand Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV) Option 2) Please note, if you are adding a ‘Magic Eye/TV Link’ to your system so that you can use your Sky remote control to change the Sky channel in the room where the 2nd TV is located, please refer to the instructions included with the TV link/magic eye in order to ensure the RF or RF2 output on your Sky box is powered on.
Product support Help is always at hand Frequently asked questions General I would like to have 1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available louder sound by separately) to connect to an amplifi er/surround sound system. Please note connecting additional this will deactivate the TV’s built in speakers.
Page 34
Product support Help is always at hand Frequently asked questions Game I have connected my Component cables only provide HD pictures. For the sound you will need Consoles Playstation/Xbox to to connect the red & white audio cables on the Playstation/Xbox to the red the TV via Component &...
Product support Help is always at hand Technical specifi cation Product fiche Trademark Bush Model ID 40/135O-WB-11B4-FEGP-UK Energy effi ciency class Visible screen size (diagonal) 102 cm / 40 inches On mode power consumption 48.0 W Annual energy consumption *1...
Page 36
Product support Help is always at hand Technical specifi cation Compatible files in USB Mode Codec Remark Media File Ext. Video Audio Max Resolution: 1920x1080 .mpg MPEG-1, MPEG-2 Max Data Rate: 40 Mbps Xvid, MJPEG .avi MPEG-4 SP/ASP, H.263/H.264 MPEG-2, H.264, HEVC MP3, AAC, Max Resolution: 1920×1080...
Page 37
Help is always at hand Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates.
Need help?
Do you have a question about the 40/135O-WB-11B4-FEGP-UK and is the answer not in the manual?
Questions and answers