Gtech HT03 Instruction Manual

Thank you for your purchasing the RF Laser Mouse and Multimedia keyboard bundle.
This USB combo is composed of 7-button Laser mouse with USB dongle receiver and 14-Multimedia
key keyboard.

INSTALLING BATTERIES

The wireless Laser Mouse uses two AA batteries. The Multimedia keyboard uses two AA
batteries. Installing batteries for the mouse and keyboard as follow:
1 Open the battery compartment cover.
2 Insert the AA MAXELL batteries into the mouse battery compartments as indicated by the
polarity symbols
(+and-) marked inside. Insert the AA batteries into the keyboard's battery compartments as indicated by the polarity symbols (+and-)
marked inside.
3 Replace the battery compartment covers.

CONNECTING RECEIVER

1 Make sure your computer system is turned ON.
2 Plug the USB port of receiver into the USB port of your computer.
3 Set up the receiver at least 20CM (8 inches) away from other electronic devices. Such as monitor
and external storage drives.

SETTING UP THE ID WIRELESS LINK

1 Start up your computer.
2 Press "connect" of receiver the indicator will light on and the receiver is successful to connection.
3 Press "connect" of keyboard the connection indicator the Receiver indicator light goes off, the keyboard is working.
4 Press "connect" of receiver the indicator will light on and the receiver is successful to connection.0
5 Press "connect" of Mouse the Receiver connection indicator light goes off, the Mouse is working.
a.
Please repeat step 2 to step 3 and step 4 to step 5 for the first use or changing batteries.
b. Keyboard and Mouse will have a set of ID CODE to avoid interference when a lot of RF products using in the same place, you
should change the ID CODE as some occasionally interfering. (Please follow step2, step 3 and step4, step 5.)
A
c. " " light on your computer means Capital ON state,

INSTALLING THE SOFTWARE

You can achieve some function without software under system Win/Me /2000/XP. To take advantage of all the features of your laser Mouse
and Multimedia keyboard, please install the software that comes with the product.
1 Turn on your computer and start Windows;
2 Insert the software of CD, run SETUP files of KEYBOARD and MOUSE.
F Wireless Multimedia Keyboard(HT03) and Laser Mouse
Desktop Instruction Manual
- 1 -
1
light on your computer means Num Lock ON state.
¡ ¢