Hardware Specifications - Bandai Namco Pac-Man Air Hockey Owner's Manual

Hardware Specifications

Power Supply
Provides power to all internal components, such as the motherboard, coin mechanism,
motor. etc. The +12 VDC and +24VDC are separated to ensure no interference to components
when one has an insufficient supply or an unstable supply of power.
Note: +24 VDC is on the left
Motor PCB
Motor PCB switches the blower motor on and off. When the green LED is on, the
motor is on! Main PCB control the motor PCB.
Avoid electric shock. Do not touch open
terminals or exposed wires. Please turn
off the game to perform repairs.
Hazardous voltage, which can cause
electrical shock, exists inside the
equipment. Only qualified personnel
should work inside the equipment.
Machine is shipped set to 120 Volts, if
operating this machine in an area that
uses 220 Volts, both power supplies
must be changed or severe damage will
occur.
To change the voltage, swipe the red
switch inside the both power supplies.
+12 VDC is on the right
Risk of Electric Shock
Warning