Zenith Z42LC6DF Installation And Operating Manual page 12

PREPARATION
HDMI/DVI IN
Connect a HDMI signal to 1, 2 or 3.
Or DVI (VIDEO) signal to the 1, 2 or 3 port
with a DVI to HDMI cable.
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
RGB (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO (RGB/DVI)
1/8" headphone jack for analog PC audio input.
REMOTE CONTROL PORT
For a wired remote control.
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
10
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Note: In standby mode, these ports do not
work.
AUDIO OUT
Analog audio output for use with amps and
home theater systems.
AV (Audio/Video) IN
Analog composite connection. Supports
standard definition video only (480i).
S -VIDEO
Better quality than standard composition.
Supports standard definition video only (480i).
USB INPUT
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC power.