GuideReader Tablet ........... What’s In The Box? ............ Product Overview ............Using Your GuideReader Tablet ....... Turning Your GuideReader Tablet On ..... Putting Your GuideReader Tablet Into Sleep Mode ............Turning Your GuideReader Tablet Off ..... Navigating Your GuideReader Tablet .....
GuideReader Tablet This quick start guide will help you get to know your GuideReader Tablet and explain how to get the most out of all of its great features. What’s In The Box? Please ensure the following items are present in the box.
Page 5
Power/sleep button. 3.5mm stereo headphone port. Micro USB power port - indicated by a tactile yellow sticker on the back of your GuideReader Tablet. Speaker - Your GuideReader speaker is positioned on the back of the device. It is recommended that you use the provided stand for optimal sound quality.
Putting your GuideReader tablet into sleep mode: Press the Power/ Sleep button once. The screen switches off and your GuideReader Tablet will be in Sleep mode. To wake GuideReader from Sleep mode, press the Power/Sleep button once. The screen wakes up and shows your GuideReader screen.
GuideReader. The training tutorials appear the first time you start your GuideReader and take only a few minutes to complete. You can revisit the training tutorials at any time...
Useful Touch Screen Gestures To select an item: tap the item on the screen with 1 finger. To make the text and images larger: place 2 fingers on the screen close together and slide them apart. To make the text and images smaller: place 2 fingers on the screen and pinch them...
Navigate Using The Dolphin Remote The Dolphin Remote is a device you can use to control your GuideReader. This device requires 2x AAA batteries (included). Bluetooth Pairing - Pair the Dolphin Remote with your GuideReader Tablet. NOTE: Your Remote has already been paired to your Tablet and is ready to use.
GuideReader on for the first time. 1. Plug the charger into a wall outlet. 2. Connect the charger to your GuideReader via the power port. The Power port is indicated by a yellow tactile sticker.
The maximum supported size for an SD card is 32GB. To replace the Micro SD memory card: 1. Locate the Micro SD card slot on your GuideReader Tablet. 2. Remove the Micro SD card by pushing in on the cards edge.
General Information Important Safety Information Your GuideReader should be treated with care. The information below has been provided in the interest of safety and will help you to enjoy this product and the benefits it brings for many years.
Page 13
• DO NOT leave it in low temperatures as moisture can form inside the product, which may damage the circuit board. • DO NOT block or cover slots, holes or openings on the product by placing on soft furnishings such as carpets, rugs or beds as these are provided for functionality and/or ventilation to ensure safe operation of the product.
If you suspect that the battery is dead, try charging it several times and follow the steps for charging GuideReader. Do NOT attempt to change the battery yourself. CAUTION: Danger of explosion if batteries are incorrectly replaced.
• Batteries are harmful if swallowed, so keep away from and out of reach of infants and young children. Licence And Warranty Your GuideReader Tablet comes complete with a full 12 month guarantee from the date of purchase. More information about your licence agreement and warranty is available at www.YourDolphin.com/GuideReader.
Need help?
Do you have a question about the GuideReader and is the answer not in the manual?
Questions and answers