CONTENTS Warranty Warranty For full details please visit us at www.909.com Introduction Environmental protection Specifications General safety warnings and instructions Important safety instructions Additional safety instructions for the charger Know your product Introduction Charging/recharging the spotlight Operating Instructions Care and maintenance...
Manual before using your new 909 appliance. Take special care to heed the Cautions and Warnings. Your 909 appliance has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.
General safety warnings and instructions Important safety instruction Instructions pertaining to a risk of fire, electric shock, Read all instructions exposure to excessive UV radiation, or injury to WARNING: Read all instructions before operating spotlight. persons Failure to follow all instructions listed below may result in Lighted lamp is HOT.
• When an extension cord is used: • The charger and torch are specifically designed to work together. Do not attempt to charge the torch with any – The marked rating of the detachable power supply other charger than the one supplied. cord or extension cord should be at least as great as the electrical rating of this appliance.
Page 6
• Keep sharp objects away from lens — it is glass and can break. • Do not immerse spotlight in water. • Do not expose this unit to extremely high temperatures. • Do not drop or throw spotlight. It contains glass and a sealed lead acid battery.
• Charge the Battery for a max of 8 hours. The red LED will Introduction remain ON during the charging process. Congratulations on purchasing your new spotlight. Read Make sure the DC source (jump-starter, battery pack, this Instruction Manual and follow the instructions carefully vehicle accessory outlet, etc.) is 12 volt DC and is able to before using your new Rechargeable Spotlight.
Never submerge the unit in water. If the unit gets dirty, 3. Using the screwdriver, remove (counterclockwise) the gently clean the outer surfaces of the spotlight unit with two screws. Set them aside. a soft cloth moistened with a mild solution of water and 4.
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please contact manufacturer at www.909.com. WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
Need help?
Do you have a question about the 10301 and is the answer not in the manual?
Questions and answers