Summary of Contents for E-Care LCT-210 series
- Page 1 LCT-210 SERIES Infrared Ear Thermometer Instruction Manual ATTENTION, SEE INSTRUCTIONS...
-
Page 2: Knowing Body Temperature
1. Knowing Body Temperature Normal human body temperature is a rang, not a fixed value. It fluctuates throughout the day; generally, lowest in the morning and highest at sunset.It also tends to decrease with the age - infant has higher temperature than adult . As well , different sites (oral , axilla , rectum and ear) have different temperature - generally speaking,ear temperature is close to oral but higher about 0.5... - Page 3 2.Safety Notes Prior Usage 1. Please make sure the cleanness of the optical glass inside the probe (A-1) , and wipe it up with a cotton swab while earwax covered (If moistened with alcohol, please wait and restart after 5 minutes; otherwise, the result of measurement will be too low and inaccurate).
-
Page 4: Product Description
3.Product Description: Probe 5.Measurement button 2.Display 4.on/off 3.Function Memory button 6.Battery cover... -
Page 5: Usage Method
4. Usage Method: 1. Please make sure the cleanness of the optical glass inside the probe. You can use a cotton swap to clean the optical glass; if moistened with alcohol, waiting and restarting after 5 minutes, otherwise the result of measurement will be too low. If the ear temperature is over 38.0 ,it is fever. - Page 6 Children under 1 year: Pull the ear Children aged 1 year to adult: Pull straight back. the ear up and back. While tugging the ear, fit the probe snugly into the ear canal as far as possible and press the measurement button. Release it,when you hear the Beep.
- Page 7 LCT-210 has forehead function and is better for checking many persons. We suggest that using the forehead function to check temperature at first ( aim at forehead at a distance about 1 cm-really do not touch the skin). If the person's forehead temperature is higher than 37 , then switch to ear function to double check his temperature.
-
Page 8: Display Symbol Instruction
Display symbol instruction LCD display Display meaning Description All segments displayed. urn on the unit When display (LCD) displayed symbol" Ready (Ear) "means ready Ear Thermometer. The thermometer is Work working. Measurement complete, Measurement the unit is ready again complete for next measurement. -
Page 9: Auto Memory
Auto Memory 1. Turn the thermometer on. 2. Press the memory button. 3. Read the temperature in last time from the display. 4. According to the same method as above, press the memory button twice, the display will show the temperature of last two times,and so on. Changing Temperature Scale: 1. -
Page 10: Error Messages
Error messages: Possible cause and fault LCD display Display meaning remedy Display when Measured temperature measured temperature too high higher than 50 . Please return to measurement. Display when Measured temperature measured temperature too low lower than 0 . Please return to measurement. -
Page 11: Storage Method
5. Storage Method 1. Do not expose to temperature extremes below(-20 (-4 ) or over 50 (122 )), or excessive humidity( over95%RH). 2. Do not expose to direct sunlight or near any fire. 3. Do not shock, vibrate, drop or step on the thermometer. 4. -
Page 12: Technical Specifications
6. Technical Specifications: Model LCT-210 Ear Thermometer Sensor type Thermopile Displayed temperature range 0 ~50 (32 ~122 ) Operating ambient temperature range 10 ~40 (50 ~104 ) 0~95% RH Operating ambient humidity range Accuracy Auto-memorized the last ten or five Memory measured temperature. -
Page 13: Guarantee Card
Battery and other consumptions, i.e. probe cover, are excluded from the guarantee. Claims only valid if accompanied by a stamped and dated guarantee card. LCT-210 series Infrared Ear Thermometer Guarantee Card Date of purchase: Name and full address of purchaser: Stamp and signature of dealer:...