1. Manuals
  2. Brands
  3. Solid Manuals
  4. IP Access Controllers
  5. Solicard 4000
  6. Installation manual

Solid Solicard 4000 Installation Manual

Access control system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Contents
Introduction _______________________________________________ 1
Terminology _______________________________________________ 2
Technical specification ______________________________________ 3
4000CE ___________________________________________________ 8
4014LC Loop card ____________________________________________ 11
6416RK Relay card____________________________________________ 12
Peripheral Equipment _________________________________________ 13
DAC-30 __________________________________________________ 14
Peripheral Equipment _________________________________________ 21
Installation of DAC-30 _________________________________________ 22
Card Reader ______________________________________________ 23
Peripheral Equipment _________________________________________ 25
Assembly ________________________________________________ 26
Card Reader _________________________________________________ 27
Doors_______________________________________________________ 28
Wiring ______________________________________________________ 29
Master reset and addressing_________________________________ 32
Master reset and running mode for 4000 _________________________ 32
Check-list at start up _______________________________________ 35
At the door __________________________________________________ 36
Indications _______________________________________________ 37
Trouble shooting guide________________________________________ 38
Overviews ________________________________________________ 39
Wiring Diagrams___________________________________________ 51
IG554000931B.doc
Installation guide UK
II
___________________________ 34
Contents 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solicard 4000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Solid Solicard 4000

  • Page 1: Table Of Contents

    SOLICARD 4000 Installation guide UK Contents Introduction _______________________________________________ 1 Terminology _______________________________________________ 2 Technical specification ______________________________________ 3 4000CE ___________________________________________________ 8 4014LC Loop card ____________________________________________ 11 6416RK Relay card____________________________________________ 12 Peripheral Equipment _________________________________________ 13 DAC-30 __________________________________________________ 14 Peripheral Equipment _________________________________________ 21 Installation of DAC-30 _________________________________________ 22...

  • Page 3: Introduction

    Introduction The purpose of this manual is to assist in the projecting and installation of the access control system SOLICARD 4000. The manual is intended for project managers or leaders, consultants, and installation technicians. Readers of this manual should possess a basic knowledge of telecom equipment.

  • Page 4: Terminology

    It is important to establish card users and access levels before the programming of the system is made. SOLICARD 4000 can handle 1 to 16 doors and is delivered with an easy to use program for Windows. The system is built around a control unit where an intelligent DAC-30 is...

  • Page 5: Technical Specification

    SOLICARD 4000 Installation guide UK Technical specification 4000 Control unit 24V feeding KP-1:1&2 17-24V AC/DC At 12V DC feeding KP-1:3&4 +12V = 3/0V = 4 Temperature range +5° – +40°C See Table 1 Internal consumption below The table below shows the current consumption in 4000 when communicating with DAC-30 (not running DAC-30).
  • Page 6 SOLICARD 4000 Installation guide UK DAC-30 24V feeding KP-1:1&2 17-24V AC/DC * 12V DC stabilized feeding KP-1:6&7 +12V = 6/0V = 7 Temperature range +5° to +40° C 12V DC Max 130mA DAC-30 current consumption 24V DC Max 70mA Current consumption relay card Approx.
  • Page 7 SOLICARD 4000 Installation guide UK The table below shows the DAC-30 fed with 24V and with a motor lock connected. At work Slowed down Normal mode/ Waiting mode DAC-30 Start Remaining Run for 3 sec., pause Plus Table 6 x for 4 sec.
  • Page 8 SOLICARD 4000 Installation guide UK 6355MLB Card reader Voltage in 12V (from DAC-30) Temperature range -40°C to +85° C The tables below shows the current consumption for the reader connected to DAC-30. Normal 6355MLB connected to DAC-30 that is fed with 24V...
  • Page 9 SOLICARD 4000 Installation guide UK System configuration In the basic design the system can handle up to 4 doors (inner and outer reader) and is delivered complete with an easy to use Windows program for the programming. Se more in the User guide under the heading To the installation contractor wireman.

  • Page 10: 4000Ce

    SOLICARD 4000 Installation guide UK 4000CE 4000CE in its basic design contains; a CPU card (at the top) and a loop card (below) mounted in an aluminium casing. The control unit can be supplemented with a relay card that is mounted over the CPU card giving free relay outputs.
  • Page 11 SOLICARD 4000 Installation guide UK Casing The casing is made of aluminium with lock and 7 rubber inlets, where the hole have a diameter of 3x15,2 mm, 2x18,6 mm and 2x22,5 mm. The casing with the measure 404,5x218x98,5 mm can hold up to 4 loop...
  • Page 12 SOLICARD 4000 Installation guide UK CPU card Microprocessor with memory, real time clock and built in backup. All information for the control of the system is stored here, including data from card and schedule times. Portable programmer connection and terminal block (KP-01) you find on this card.

  • Page 13: 4014Lc Loop Card

    SOLICARD 4000 Installation guide UK 4014LC Loop card Connections to the DAC-30 for each door are made on this card (4 doors per card). The power supply to the door details (DAC-30, electric strike etc.) is connected to this card when they are not locally powered.

  • Page 14: 6416Rk Relay Card

    SOLICARD 4000 Installation guide UK 6416RK Relay card The relay card is mounted over the CPU card with enclosed screws. The enclosed flat cable is connected between the relay card and J8 on the CPU card (to the right on the card, above the terminal block).

  • Page 15: Peripheral Equipment

    Signal Transducer CL-20 Comprises the interface between the RS232 computer output and the current loop of SOLICARD 4000. The power supply comes from a separate transformer. Transformer ST60S ST60S is a protective transformer (240/24V 2,5A) with a ring-core that has thermal protection.

  • Page 16: Dac-30

    SOLICARD 4000 Installation guide UK DAC-30 DAC-30 is an intelligent unit where all the door connections are made, for example reader, electric strike, exit button, door monitor contact, alarm etc.
  • Page 17 SOLICARD 4000 Installation guide UK Terminal block KP-1 Terminal block KP-2...
  • Page 18 SOLICARD 4000 Installation guide UK Terminal block description DAC-30 Free/D-N (KP-1:8) Day/Night function for motor lock. Linked to 0V = Day. Works as a free input when motor lock not is connected. All changes generate a log event. Schedule controlled output (KP-1:10) Active C- out, Max 100mA.
  • Page 19 SOLICARD 4000 Installation guide UK Terminal block Relay card DAC-30RC There are four relays on the relay card DAC-30RC Choose between NO & NC with the jumper links to the right on the relay card. The desired functions is set via the PC program, see further in the user guide.
  • Page 20 SOLICARD 4000 Installation guide UK Terminal block Alarm Interface DAC-30AI The option card is mounted on the place for the relay card. This means that you have to choose if it should be a relay function or a detector function since only one of the cards can be mounted.
  • Page 21 SOLICARD 4000 Installation guide UK Balanced Door monitor contact KP-2 9&10 DIP 6 ON = Balanced Input on SW 2,2kΩ resistors will be delivered with DAC-30. These are the valid values for the input on DAC-30 (KP-2:9&10) < 1,8kΩ 1,8kΩ ≤ R <...
  • Page 22 SOLICARD 4000 Installation guide UK Jumper link field DAC-30 For function and power KP-2:11&12. Jumper link placing for different functions. In the lower right corner of the card are the following jumper links. Note! To be read from top to bottom.

  • Page 23: Peripheral Equipment

    SOLICARD 4000 Installation guide UK Peripheral Equipment For further information on these products we reefer to the product data sheets for each product. Interface 6390IF Interface for handling of OEM-reader, for Wiegand, Proximity or clock/data (magnetic) and external XY–keyboards in the Solicard systems.

  • Page 24: Installation Of Dac-30

    SOLICARD 4000 Installation guide UK Installation of DAC-30 Indications at DAC-30 start up together with control unit, reader and motor lock. The following LED-indicators can be found in the upper right corner of the board: PWR (Power) – Yellow indication, indicates that system is powered WDG (OK) –...

  • Page 25: Card Reader

    SOLICARD 4000 Installation guide UK Card Reader 6355MLB is a vertical slot reader for magnetic cards, with built-in keypad and sharp enlightened symbols. The card reader can be used both indoors and outdoors, IP54. The 12 non-corrosive push buttons have a distinct “push feeling”...
  • Page 26 SOLICARD 4000 Installation guide UK...

  • Page 27: Peripheral Equipment

    SOLICARD 4000 Installation guide UK Peripheral Equipment For further information on these products we reefer to the product data sheets for each product. Heater 6350VS / 6355VS Heat is provided to the reader by fitting a heating element 6350VS/6355VS in the card reader. The heater is fed from its own transformer and has an effect of 5W.

  • Page 28: Assembly

    SOLICARD 4000 Installation guide UK Assembly It is of the utmost importance that doors, door bolts, locks, hinges, etc. are faultless. In other case you get a bad function. Doors will not unlock, doors hang on the lock bolt and so on. This gives an overall bad impression of the system.

  • Page 29: Card Reader

    SOLICARD 4000 Installation guide UK Card Reader Wall Assembly The card reader should be fitted at a height of 1250 mm above the floor, measured from the lower edge of the casing. It should be placed as close to the door handle as possible, not on the “hinge side”. In addition make sure that there is a free space of 20 cm both above and below the slit where the card is to be swiped.

  • Page 30: Doors

    SOLICARD 4000 Installation guide UK Doors In a standard system all existing doors will be used. Check that door opens and shuts smoothly and that it is equipped with a door shutter. If twin doors are used it is very important that the normally closed door is securely bolted with espagnolette or such like.

  • Page 31: Wiring

    SOLICARD 4000 Installation guide UK Wiring At cable extension it is important to use the correct cable type. UNIT DISTANCE PC – CONTROL UNIT 15 METER DAC-30 – CONTROL UNIT* 1000 METER DAC-30 – CARD READER# 1000 METER * DAC-30 – locally at door.
  • Page 32 SOLICARD 4000 Installation guide UK Outside installation Pay regard to the mechanical protection. If there is risk of damages to the cable, by for example snow ploughs, the cable should be protected with sheet metal edges or valve. Inside installation Wiring should, as much as possible, be concealed.
  • Page 33 SOLICARD 4000 Installation guide UK Heater If the card reader is to be equipped with a heater this should have a separate power supply. This can be made via the cable between the card reader and DAC-30, which then need one pair further, i.e. at least 3-pair.

  • Page 34: Master Reset And Addressing

    SOLICARD 4000 Installation guide UK Master reset and addressing A Master reset is made to reset 4000CE and DAC-30 so that all unwanted information is erased from the memory, after that the addressing is made. Addressing is made on every DAC-30 and card reader so they get an unique address.
  • Page 35 SOLICARD 4000 Installation guide UK The table shows how to set the DIP-switches, when addressing the DAC-30. Door/DIP Note! Address 0 is only to be used when a Master reset is made. DIP 6 ON = Balanced Input on SW, KP-2: 9&10 micro switch/door. For further information, refer to page 16.

  • Page 36: Addressing Of Card Reader 6355Mlb Ii

    SOLICARD 4000 Installation guide UK Addressing of Card reader 6355MLB When connecting one (1) card reader to DAC-30 the address should be 0 (zero). When connecting both outer and inner card reader the outer should have address 0 (zero) and the inner card reader address 4 (four).

  • Page 37: Check-List At Start Up

    SOLICARD 4000 Installation guide UK Check-list at start up • Check that all cable connections have been isolated and are tightened. • Connect both door monitor and blocking input to 0V if the not are used (DAC-30, KP02:9&10 and 15&16).

  • Page 38: At The Door

    SOLICARD 4000 Installation guide UK At the door 1. Press the exit button. Press the exit button. If not, check the connections (make sure that KP02:15 in DAC-30 is connected to 0V). 2. Press the exit button and open the door within 3 seconds. The electric strike should lock when the door has been opened.

  • Page 39: Indications

    LED unlit = Communication cables OK, but the control unit do not communicate, or all the doors might be uninstalled in the software. In the Solicard 4000 control unit there are two LED indications: LED 1 – (OK) – Flashes fast, approx. 15 Hz = The control unit works normally.

  • Page 40: Trouble Shooting Guide

    SOLICARD 4000 Installation guide UK Trouble shooting guide PROBLEM STEP The card symbol and the Same address on the inside and outside red man flashes reader (communication interference). alternately. Step: Address both reader correctly, the outside reader should have address 0 (zero) and the inside address 4 (four).

  • Page 41: Overviews

    SOLICARD 4000 Installation guide UK Overviews The easiest way to describe the connections in Solicard 4000 is to show some overviews. Therefore follows some simple pictures that shows how connections are to be made. Control unit and Loop card, terminal blocks...
  • Page 42 SOLICARD 4000 Installation guide UK DAC-30 Terminal blocks...
  • Page 43 SOLICARD 4000 Installation guide UK Connections from Loop card to DAC-30 with power from CE...
  • Page 44 SOLICARD 4000 Installation guide UK Connections from Loop card to DAC-30 locally powered...
  • Page 45 SOLICARD 4000 Installation guide UK Connection from Loop card to DAC-30 with stabilised local power...
  • Page 46 SOLICARD 4000 Installation guide UK Standard connection between CU, Loop card and DAC-30...
  • Page 47 SOLICARD 4000 Installation guide UK Connection of electric strike/door contact to DAC-30...
  • Page 48 SOLICARD 4000 Installation guide UK Connection of exit button and reader...
  • Page 49 SOLICARD 4000 Installation guide UK Connection of inside and outside readers on the same door...
  • Page 50 SOLICARD 4000 Installation guide UK All connection possibilities in a DAC-30 connected to CE...
  • Page 51 SOLICARD 4000 Installation guide UK Connection to PC...
  • Page 52 SOLICARD 4000 Installation guide UK Connection to 4016RC Relay card...

  • Page 53: Wiring Diagrams

    SOLICARD 4000 Installation guide UK Wiring Diagrams The current consumption is calculated to max 2,5A/4 doors...
  • Page 54 SOLICARD 4000 Installation guide UK CL-20...
  • Page 55 SOLICARD 4000 Installation guide UK Reader and electric strike from DAC-30...
  • Page 56 SOLICARD 4000 Installation guide UK Two readers and motor lock separately to DAC-30 One reader and motor lock to DAC-30...
  • Page 57 SOLICARD 4000 Installation guide UK Outside reader connected in series with inside reader to DAC-30 Dac-30 and one reader...
  • Page 58 SOLICARD 4000 Installation guide UK Own Notes...
  • Page 59 SOLICARD 4000 Installation guide UK Own Notes...
  • Page 60 SOLICARD 4000 Installation guide UK Own Notes...

Table of Contents

Save PDF