Advertisement
BEFORE THE FIRST USE
2. Pour the pre-measured amount of water
from the measuring cup directly into the
Carefully unpack the unit and remove any
warming chamber (fig. 2).
packaging and promotional labels in or on
the bottle warmer. Rinse all accessories
3. Do not overfill. If too much water is used,
thoroughly in warm soapy water.
the bottle or jar may be heated for too
long a period and reach too high a
OPERATION
temperature.
To warm your baby's bottle or food, please
Note: Always make sure there is no water
follow the instructions and the chart below.
in chamber from previous use. To empty
the unit of leftover water, tilt the unit onto
NOTE: These instructions are to be used
its side over the sink. Any extra water will
as a guide only. Please note that there are
come out.
many variables, such as size of the bottle and
starting temperature of the food, which can
affect the speed at which this unit warms the
bottle or jar as well as the final temperature.
Adjustments to the instructions below may be
necessary. Always test the temperature of
food before feeding baby.
1
1. Remove the measuring cup from the front
of the housing (fig. 1) and fill it with water
to the appropriate fill line, according to
USING THE BOTTLE
the chart below.
BASKET
Bottle Warming Guide
Bottle Capacity
5˚C/40ºF
20˚C/70ºF
For plastic bottles
4 oz (115g) Plastic
10ml
8ml
1. Put the bottle basket into the bottle-
warming chamber (fig. 3, 4). Line up the
8.9 oz (252g) Plastic
10ml
8ml
bottle basket arms with the insets on the
4 oz (115g) Glass
14ml
8ml
bottle warmer housing. In this position
8.9 oz (252g) Glass
14ml
8ml
the basket will be even/flush with the
Baby Food 4 oz. (115g)
12ml
8ml
housing.
Baby Food 6 oz.(170g)
12ml
8ml
3
4
For glass bottles
1. Put the bottle basket into the bottle
warming chamber (fig. 5, 6) and turn
the bottle basket to a 45-degree angle
(basket will slide into place). In this posi-
tion the bottle basket will sit about 1 inch
(2.5cm) above the housing.
2
5
6
2. Put the bottle into the bottle basket
(fig. 4, 6) and turn the dial to ON position.
Blue LED indicator will turn on. The unit
will shut off automatically once bottle
warming is complete. Turn the dial to the
OFF position.
3. Let the bottle sit for 15 to 30 seconds
before removing and be extremely careful
removing the bottle from the unit. Shake
the bottle to distribute the heated con-
tents before checking the temperature.
4
USING THE
USING THE FOOD
ADAPTER RING
WARMING BASKET
1. When warming a narrow bottle, we
1. Remove the lid of the food jar and then
suggest that you use the adapter ring.
place the jar into the food warming
basket. Use the handle to lower it into
2. Position the adapter ring over the bottle
the bottle warming chamber (fig. 1).
sitting in the bottle warming chamber
2. Turn the dial to the ON position. Blue
and turn the dial to the ON position. Blue
LED indicator light will turn on. The unit
LED indicator will turn on. The unit will
will shut off automatically once food
shut off automatically once bottle warm-
warming is complete. Turn the dial to the
ing is complete. Turn the dial to the OFF
OFF position.
position.
NOTE: If the adapter ring does not fit
3. Let the jar sit for 15 to 30 seconds before
loosely around the bottle, do not use.
removing. Use the handle of the food-
warming basket to lift the jar out of the
warming chamber (fig. 2). When you
remove the jar from the unit, the contents
of the jar will not be evenly heated. Stir
the food to distribute the heated contents
before checking the temperature.
USING THE NIGHTLIGHT
1. To turn the nightlight on, press the gray
button with the word LIGHT above it
located on the top of the unit.
2. Light will illuminate from the measuring
cup area and from around the dial. The
nightlight will stay on until the button is
pressed again.
5
Advertisement
