Tools: Heat gun, painters knife
or isesamo
STEP 6
Disassemble the device
•
Once the motherboard is all disconnected and removed it is time to separate the old assembly from the
frame of the device. Turn device over to the front of the glass and heat. It does not matter if you heat to long
on that side because most likely the lcd is already damaged.
•
Step 8, will show all the steps necessary to remove the assembly. First, start by taking your pry tool: isesamo
or painters knife and slide it in between the frame of device and glass. The goal is to place tool behind the
glass and Lcd as you slide tool down and, flex from left to right with tool to release it from the adhesive.