Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Night Owl 200
- Page 1 User Manual EN Night Owl 200...
- Page 2 To insure maximum experience and safety, familiarize yourself with ALL aspects of your new light and battery system: Safety Precaution ..................How to mount Night Owl 200 to a Bicycle ........... III. How to charge Night Owl 200 ...............
- Page 3 This product contains components that must be recycled per EU Directive 2002/96/EC and may not be disposed as unsorted municipal waste! ll. How to mount Night Owl 200 to a Bicycle: 1. Attach the rubber strip to one end of the light bracket;...
- Page 4 III. How to charge Night Owl 200 1. Remove the rubber cap at the bottom of light; 2. Connect the light to your PC, a regular USB wall charger or a 5V USB battery charger with the USB cable. A LED under the front lens lights up red, signaling the charging has started.
- Page 5 Run time (in hours) Power (in lumens) Turning off Night Owl 200: Press and hold the button for one to three seconds. Checking Battery Level: When the light is turned off, press the button for 3 seconds and release. The light will flash from 1 to 10 times indicating the battery level remaining (10 flashes indicate - 100% charge, 9 flashes - 90%, 8 flashes –...
- Page 6 Charge time: 4 ~ 10 hours Battery discharge time: - 120 minutes in High mode (100 % or 200 lumens) - 240 minutes in Medium mode (50% or 100 lumens) - 1200 minutes in Low mode (10% or 20 lumens) - 2400 minutes in Flash mode (200 Lumens) ...
- Page 7 Operation Modes: Short press of the power button will switch through cycles & shut down the MicroBot. The initial short press of the power button will turn on the light on High mode. Each additional short press of the power button switches the light from one mode to the next, in the following order: (1) quick flash;...
Need help?
Do you have a question about the 200 and is the answer not in the manual?
Questions and answers